Equipment
All-new 2020 Mizuno M-Craft putters
For the first time in a long time, Mizuno is giving golfers the opportunity to play Mizuno clubs entirely from top to bottom in their sets with the reintroduction of a putter line for 2020—the Mizuno M-Craft.
Like mentioned off the top, it’s been a while since you’ve been able to find a Mizuno putter in North America, and the last time you could, the Mizuno name didn’t stand alone. At one point in time, Mizuno has worked with some great putter designers, from Scotty Cameron (yes, that Scotty Cameron), to T.P Mills, and Bettinardi. Each line was considered a success but never had the mass appeal or caught on as anyone had hoped.
Cameron moved on to Titleist to become the juggernaut he is today, T.P Mills went back to focusing on smaller runs, and Bettinardi took the step and successfully branched out under their own singular brand after their partnership agreement ended. All were great products, but Mizuno felt now was the time to go all-in on creating a classic line of putters to cater to the Mizuno Player.
Three Putters, One Story
The M-Craft Putter Line consists of Mizuno designers putting their own take on three classic head styles; The Anser, slant-neck, and face-balanced mid-mallet. Sticking with refining those classic shapes will garner the most eyes and improve the likelihood of golfers to try it out.
Mizuno M-CRAFT I – Slant Neck
Mizuno M-Craft II – Anser Style
M-CRAFT III – Mid Mallet
They will also come in 3 different finish options too; Satin Chrome, Mizuno Blue, & Black.
Construction & Technology
Mizuno irons are known for their classic feel, and they are bringing the same philosophy of design to the M-Craft Putters. Milled from solid blocks of forged 1025 Steel, the faces are deeper milled to produce a soft yet solid sound at impact.
The technology story behind the putters is straight forward and that’s okay because we’re talking about a milled putter and not a multi-material 460cc driver after all. There is head weight adjustability, and its something Mizuno is very excited about since unlike other putter companies, the M-Craft kit comes completely stock with any putter. This gives the golfer the opportunity to fine-tune head weight as well as causing slight changes to toe hang.
The final touches are a Lamkin Deep Etched Grip, and a cover that takes its cues from the classic Mizuno lineage of colors, for a trip down design memory lane.
The Mizuno M-Craft putters will be $299.99, and are available for pre-order January 21st, and will be found at retail locations starting February 14.
Neal Shipley was the first to admit that he enjoyed his food while in college. But since his days at Ohio State, he’s slimmed down and earned a PGA Tour Card.
That hasn’t stopped him from having fun with his wedge stampings, though it’s led to some misunderstandings.
On the 54 (degree), we have ‘Big Fudge,'” Shipley told GolfWRX. “It was supposed to be ‘Big Fridge,’ so this happened a little while ago. ‘Big Fridge’ was a nickname between my college teammates and I, with ‘fridge’ meaning stomach, a big stomach.
“We told the Ping guys to put … ‘Big Fridge’ on it, and I think maybe some bad cell service or something, and they thought I said ‘fudge,’ so they put fudge on it.”
On Shipley’s 50-degree he also continues the food theme, this time with his go-to order at the “Golden Arches,” and his stamping “DONS 7.”
“The number 7 meal, the two cheeseburger meal, that was my McDonald’s order, back when I would have McDonald’s frequently,” Shipley shared.
At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, @raw10628 has a L.A.B. DF3 putter and Masters putter cover up for grabs.
From the listing: “Some great items here today, time to thin out and make room for next set of gear. All prices include shipping.
LAB DF3 Purple 33.5” 68° lie with TPT – $725. LAB Masters release DF3 cover – $150.”
To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules
Driver: Ping G440 LST (9 degrees)
Shaft: Accra TourZ Green 5-M4
3-wood: Ping G440 Max (15 degrees)
Shaft: Accra TourZ Green 6-M4
5-wood: Ping G440 Max (19 degrees @18)
Shaft: Accra TourZ Green 6-M4
Hybrid: Ping G440 (23 degrees)
Shaft: Oban Isawa Red Hybrid Shaft 04 Flex 70 Gms
Irons: Srixon ZXi7 (5-P)
Shafts: Aerotech SteelFiber Private Reserve i80
Wedges: Cleveland RTZ (50-MID, 54-FULL, 58-MID)
Shafts: Aerotech SteelFiber Private Reserve i105
Putter: L.A.B. Golf OZ.1i
Shaft: ACCRA Putter Shaft
Grips: Golf Pride Tour Velvet
Aaron Rai’s winning WITB: 2026 PGA Championship
Russell Henley’s winning WITB: 2026 Charles Schwab Challenge
Photos from the 2026 CJ Cup Byron Nelson
CJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
Charles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
Details on J.J. Spaun’s surprise putter switch
GolfWRX Launch Report: 2026 Titleist GTS drivers
Photos from the 2026 Charles Schwab Challenge
PGA Championship Tour Report: Fitzpatrick, Koepka among big-name putter switches for Aronimink
Photos from the ShopRite LPGA
Maria Torres WITB 2026 (June)
Driver: Ping G440 LST (9 degrees) Shaft: Accra TourZ Green 5-M4 3-wood: Ping G440 Max (15 degrees) Shaft: Accra TourZ Green 6-M4 5-wood: Ping G440...
Eric Cole WITB 2026 (June)
Driver: PXG Lightning Tour Max (9 degrees) Shaft: Project X Titan Yellow 70 TX 3-wood: TaylorMade Qi4D (15 degrees) Shaft:...
Si Woo Kim WITB 2026 (May)
Driver: Callaway Quantum Triple Diamond (8.5 degrees) Shaft: Fujikura Ventus Black 6 X Mini driver: Callaway Paradym Ai Smoke Mini...
Wyndham Clark’s winning WITB: 2026 CJ Cup Byron Nelson
Driver: TaylorMade Qi4D (10.5 degrees) Shaft: Project X Titan Yellow 60 TX 3-wood: TaylorMade Qi4D Tour (15 degrees) Shaft: Project...
Joe
Aug 21, 2020 at 3:44 pm
I am shocked no one came into this comment section and say it looks like a PING or Odyssey just like every other club that comes out.
These look great and they feel terrific. The feel of the putt is soft but reacts off the putter just right. I am getting the III shortly.
Per Olav Gimnaes
Jan 13, 2020 at 12:03 pm
I have the newport 2 and fastback 1,5 t , I like these , will go for a blue one in mid tow flow 🙂 think they look great 🙂
BeachBum
Jan 11, 2020 at 9:49 pm
Does the market really need another scottie cameron putter at $300?
Madtowntom
Jan 19, 2020 at 1:13 pm
Since the Scotty Cameron putters are $400, perhaps the answer is “why not?” 🙂
you know
Jan 10, 2020 at 7:42 pm
Toe hang still dominantly influenced by hosel placement that orients the shaft relative to heel-to-toe alignment..
SAM R BELLAMY
Jan 10, 2020 at 6:00 pm
I NEVER thought I would putt with something from Mizuno. If the feel is anything comparable to the irons, I’m in.
southpawhacker
Jan 10, 2020 at 2:03 pm
Any word on lefty availability?
G
Jan 10, 2020 at 1:06 pm
our rep brought them by for us to try out. feel great, think scottys before he ruined the feel by using an insert
Joe
Jan 10, 2020 at 11:41 am
They will be on the clearance aisle for $29.99 in 9 months!!!
Travisty
Jan 11, 2020 at 1:21 pm
Don’t be so obnoxious.
Moosejaw McWilligher
Jan 11, 2020 at 7:54 pm
Put your money where your mouth is: I will buy 6 of the Anser style from you in 9 months for $50 each – you’ll make $20 profit on each one!
JD
Jan 10, 2020 at 11:12 am
Wow, minimal stamping, clean face, and adjustable weights included… some other folks need to TAKE NOTES! Very excited to see how these feel. Hopefully my local golf shop gets these. If anything, that headcover will be in my bag.
Tider992010
Jan 10, 2020 at 10:30 am
I can’t wait. I’ll be putting a nice blue one in my bag. I loved the old Mizuno Carbon line by Bettinardi. These look better.
DB
Jan 10, 2020 at 9:47 am
Is it just me or are the bumpers uneven? On the M-1 the toe bumper looks thicker. Then on the M-2 the heel bumper looks thicker.
Paulo
Jan 10, 2020 at 11:00 am
No I think you’re quite right.
Chris
Jan 10, 2020 at 12:44 pm
On a properly designed putter, that is often the case.
The toe features are generally larger than the heel features, otherwise, at address is looks like the heel is bigger than the toe (based on perspective).