With all of the golf shafts out there, you might never have had a chance to try VA Composites’ wares. Since 2017, Victor Afable has been designing shafts that push the limits of technology and materials in order to help all golfers. While most of the VA Composites line of shafts is built around higher launch and mid-spin, the Synystr is one of Victor’s lower launching and spinning designs.

For a full, more in-depth review, check out the Club Junkie podcast on YouTube or any podcast streaming platform.

When you look at any VA Composite shaft, you can’t help but notice the amazing, detailed graphics that all of their shafts have. The Synystr is no exception as the multi-colored splatter graphics with an evil green face on the underside. The paint splatter does make its way to the top of the shaft, breaking up the gloss black paint that runs through the majority of the shaft. Like most wood shafts, the install is pretty simple into the All Fit adaptors I use. All of my shafts are installed untipped and cut to 45 inches playing length.

On the course, the Synystr offered me low launch and spin shots with a very smooth feel. Every VA Composites shaft I have ever swung produces a smooth and responsive feel. I have hit about five different VA Composites shafts, and the Synystr is by far the lowest launching, spinning, and stiffest feeling shaft out of those. VA lists the Synystr as low/mid-launch but for me that shaft seems to launch a little lower than that.

Most of the 10.5-degree driver heads that I used I found the best performance to add a little bit of loft to ensure I was getting enough carry. Flat is an understatement for any drive that I hit, the ball just didn’t want to rise even if you were hitting into a steady breeze. Spin was also very low for me as my typical range is around 2,600-2,800 RPM but the Synystr kept that number around 2,300-2,400 RPM on almost every shot.

Even drives that started left and went right didn’t ramp up the spin, and I rarely saw a shot that touched 3,000 RPM during any range sessions. Stronger players with a lot of club head speed can sometimes be worried about overpowering a shaft and hitting draws without much control.

The Synystr is not a shaft that will be overpowered easily and it took a whole lot of effort to hit it left. The stiff handle section along with the x-stiff mid and tip sections offer a ton of stability and control for even the hardest swings. But you don’t have to be afraid of the shaft as you can pretty easily get it squared up and hit some straight, boring, bullets down the fairway.

As much as I talked about the shaft having a stiff profile and anti-left, it still offers a nice, smooth feel. As you get the club to the top you will feel it load, but less than other shafts. As you bring the shaft down through the swing you get a little bit of a kick, but you definitely feel stability keep the shaft with your swing.

At impact, there is a decent kick for such a stout and stable shaft. I mentioned it earlier but the Synystr is easy to hit a straight or slight fade, but doesn’t like to turn over hard and hit it left. The Synystr is also pretty responsive as you will feel the vibration difference between a center strike and a mishit pretty easily. I noticed that my miss, an over-the-top move with a shut face, produced a much straighter ball that didn’t curve. Those misses just started left of target and stayed there.

If you are looking for a lower launching and spinning shaft for your driver that doesn’t sacrifice a smooth feel, then you should look to try out the VA Composites Synystr shaft. I think most stronger, faster players will be impressed with what they can get out of this shaft.