Equipment
GolfWRX Spotted: TaylorMade SIM2 drivers on conforming list
The highly anticipated and buzz-creating TaylorMade SIM2 drivers are now officially on the R&A’s conforming list. (Expected soon on the USGA Conforming Club List). The Monday, December 14 list includes the new SIM2, and SIM2 Max, but there is no sign of a SIM2 Max D (Draw) version like there was from the 2020 line.
It could be TaylorMade is dropping the draw-biased model from the 2021 line, but there could be another explanation—and we’ll get to that in a minute.
We’re not 100 percent sure what this means for the launch date, but with the PNC Championship (formerly PNC Father-Son) taking place this week December 18-20th—featuring TaylorMade staffer Tiger Woods along with his son Charlie—it would be no surprise to potentially see it in play during this “silly season” charitable event.
TaylorMade SIM2 driver
What we know
It appears the SIM2 will continue to be the flagship model geared towards faster players based on the previous model designations. The noticeable omission right off the bat is the removal of the sliding weight track in favor of a weight screw positioned behind a through slot Speed Pocket. Around the weight it says “High MOI – LOW Spin.” This is interesting because nowhere on the previous SIM did it say anything about MOI, and this most likely means that these new TaylorMade drivers add extra stability to increase MOI.
The Speed Pocket on the sole is not a new technology, but this new pocket looks to be one of the widest TaylorMade has ever put on a driver.
Without the sliding weight, the next noticeable thing about the driver and the other SIM2 driver on the list is the amount of carbon used on the sole of the club. This weight saving must be TaylorMade’s way of removing mass from the middle of the head to reposition around to increase stability, with the final piece of the puzzle being what looks to be a larger weight for the inertia generator at the rear of the head.
Other mainstay technologies assumed to again be built into the new head include the Twist Face and Speed Injected Face to keep the SIM2 right to the max for CT (Characteristic of Time). The only unknown aspect of the sole is a small port visible on the toe—this could be where another adjustable weight screw is being used to boost MOI or it could have something to do with the Speed Injection system.
TaylorMade SIM2 Max driver
What we know
The SIM2 Max looks very similar to the standard SIM2 except for the front weight being slightly more heel biased to make the head easier to draw.
It’s hard to tell from the black and white USGA image, but the shaping of the head also looks to fall in line with the previous Max, and it could have a slightly taller face height.
Where is the SIM2 Max-D (Draw)?
As mentioned off the top there is no sign of a SIM2 Max D driver on the list yet, but it doesn’t mean there isn’t one on the way. The USGA list is intended for competition and it is less likely there would be any players who currently have any plans to put it into play and thus TaylorMade has no desire to submit a draw driver.
Conclusion
With the huge success of the 2020 SIM driver line, TaylorMade is sticking with a proven formula of shape and design characteristics. If there is one thing engineers and designers know, it’s not to mess with a good thing and the 2020 drivers were very good.
To see what other golfers are saying check out the GolfWRX forums.
Neal Shipley was the first to admit that he enjoyed his food while in college. But since his days at Ohio State, he’s slimmed down and earned a PGA Tour Card.
That hasn’t stopped him from having fun with his wedge stampings, though it’s led to some misunderstandings.
On the 54 (degree), we have ‘Big Fudge,'” Shipley told GolfWRX. “It was supposed to be ‘Big Fridge,’ so this happened a little while ago. ‘Big Fridge’ was a nickname between my college teammates and I, with ‘fridge’ meaning stomach, a big stomach.
“We told the Ping guys to put … ‘Big Fridge’ on it, and I think maybe some bad cell service or something, and they thought I said ‘fudge,’ so they put fudge on it.”
On Shipley’s 50-degree he also continues the food theme, this time with his go-to order at the “Golden Arches,” and his stamping “DONS 7.”
“The number 7 meal, the two cheeseburger meal, that was my McDonald’s order, back when I would have McDonald’s frequently,” Shipley shared.
At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, @raw10628 has a L.A.B. DF3 putter and Masters putter cover up for grabs.
From the listing: “Some great items here today, time to thin out and make room for next set of gear. All prices include shipping.
LAB DF3 Purple 33.5” 68° lie with TPT – $725. LAB Masters release DF3 cover – $150.”
To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules
Driver: Ping G440 LST (9 degrees)
Shaft: Accra TourZ Green 5-M4
3-wood: Ping G440 Max (15 degrees)
Shaft: Accra TourZ Green 6-M4
5-wood: Ping G440 Max (19 degrees @18)
Shaft: Accra TourZ Green 6-M4
Hybrid: Ping G440 (23 degrees)
Shaft: Oban Isawa Red Hybrid Shaft 04 Flex 70 Gms
Irons: Srixon ZXi7 (5-P)
Shafts: Aerotech SteelFiber Private Reserve i80
Wedges: Cleveland RTZ (50-MID, 54-FULL, 58-MID)
Shafts: Aerotech SteelFiber Private Reserve i105
Putter: L.A.B. Golf OZ.1i
Shaft: ACCRA Putter Shaft
Grips: Golf Pride Tour Velvet
Aaron Rai’s winning WITB: 2026 PGA Championship
Russell Henley’s winning WITB: 2026 Charles Schwab Challenge
Photos from the 2026 CJ Cup Byron Nelson
CJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
Charles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
Details on J.J. Spaun’s surprise putter switch
GolfWRX Launch Report: 2026 Titleist GTS drivers
Photos from the 2026 Charles Schwab Challenge
PGA Championship Tour Report: Fitzpatrick, Koepka among big-name putter switches for Aronimink
Photos from the ShopRite LPGA
Maria Torres WITB 2026 (June)
Driver: Ping G440 LST (9 degrees) Shaft: Accra TourZ Green 5-M4 3-wood: Ping G440 Max (15 degrees) Shaft: Accra TourZ Green 6-M4 5-wood: Ping G440...
Eric Cole WITB 2026 (June)
Driver: PXG Lightning Tour Max (9 degrees) Shaft: Project X Titan Yellow 70 TX 3-wood: TaylorMade Qi4D (15 degrees) Shaft:...
Si Woo Kim WITB 2026 (May)
Driver: Callaway Quantum Triple Diamond (8.5 degrees) Shaft: Fujikura Ventus Black 6 X Mini driver: Callaway Paradym Ai Smoke Mini...
Wyndham Clark’s winning WITB: 2026 CJ Cup Byron Nelson
Driver: TaylorMade Qi4D (10.5 degrees) Shaft: Project X Titan Yellow 60 TX 3-wood: TaylorMade Qi4D Tour (15 degrees) Shaft: Project...
Pingback: GolfWRX Spotted: TaylorMade SIM2 fairway woods and hybrids on conforming list – GolfWRX
Brandon
Dec 14, 2020 at 7:38 pm
Just glad they got rid of the shiny part on the fin.
Carolyn
Dec 14, 2020 at 4:34 pm
If your going to improve the driver every year maybe it is time to start offering one or two year leases on there clubs? Buying one means you pay $500 and 18 months later one round or a hundred the club is worth $98 cash or maybe $130 max on trade in. Be nice if they just charged $250 for use of the club and let you trade in in and get the next years model for another $250 we would all be ahead with that…
Craig
Dec 14, 2020 at 11:30 pm
There are shops that will do this. This is an Australian one, but I am sure there are similar elsewhere https://www.golfbox.com.au/golf-blog/golfrent-get-your-golf-gear-now/
Paulo
Dec 14, 2020 at 4:02 pm
The blue colour scheme is truly horrid on the actual retail model
Gunter Eisenberg
Dec 14, 2020 at 12:52 pm
Same old…same old…
SnotsaJerk
Dec 14, 2020 at 11:07 am
Buy the newest, bestest, and longest from the company that Needs to continue pay for play through minimal progress releases. I suggest some of us go play as a walk on and feel that “moneys worth” feeling of being “that’s You next”, multiple yards behind a Srixon, Tour Edge, or Titleist.I Love my SIM Dr, 3wd and Hy, first ever matching woods for me. My heads and covers are already painted over “custom” so B&W won’t sell me. If You still need 5 more yards You better find Yoga or Martial Arts, which You can do with Your families for a better value!!!
JP
Dec 14, 2020 at 9:49 am
Why don’t they just make a TP version. That would make a lot of golfers go crazy over it. Literally, offer a little smaller head with a TX shaft and put the TP stamp on the toe. Instant sales
gwelfgulfer
Dec 14, 2020 at 10:34 am
Because it was only the shaft that really made the old TP lines a bit better, heads were the same. So no point in todays day and age when everyone has shafts to swap out.
Travis
Dec 14, 2020 at 9:23 am
They look good in black and white, but wait until the public sees what the actual color scheme is. It’s horrendous… although European golfers might be happy =P
Bill Bogle Jr.
Dec 14, 2020 at 9:11 am
The back of the club is aluminum with a weight that Taylormade can swap out, not the consumer. Special screw. It will be interesting to see how durable the carbon fiber on the sole is when it it this prevalent. TM had some cracking with the M3&M4. It looks like the sliding weight has become a thing of the past with both Callaway and Taylormade moving on. Only fixed position changeable weights remain with TSi and G425.
matt
Dec 14, 2020 at 9:09 am
forged aluminum is the only thing i can see that’s a bit different. besides going with a crap ton of carbon on the sole, but that’s been done. isn’t this supposed to be a massive release? I mean you hear that constantly but from guys like Ian Fraser on TXG it carries a little extra weight.