Equipment
2019 TaylorMade P790Ti Irons: Pure Premium Power
Born from the quest to make great, greater, the 2019 TaylorMade P790Ti Titanium Irons go way beyond the original P790 in both materials and pushing the limits of speed. 2019 Taylormade titanium irons been the buzz on the street. By pairing some of the lightest and strongest materials with some of the most mass dense in one club, the engineers at TaylorMade have created a premium iron for the player looking for premium performance.
The body of the P790-Ti is iron is cast from 911 titanium—this is an important note because when you compare (in general terms) Ti vs. steel, their mass properties are vastly different.
Let’s do some science!
Stainless steel comes in around 8 g/cm3, Whereas titanium is 4.5 g/cm3. That makes steel 43 percent heavier than its titanium counterpart, which means the P790Ti is saving a TON of weight in its construction by using it as the whole body of the head including the face, but we’ll get to that in a minute.
If you think about a solid steel clubhead played at 37″ (usually a 7-iron), the head weight will be around 268g. If you use the above math, then the same clubhead made from titanium would only weigh 153g (rounded up). So how do we get that mass back to where it needs to be without making the head enormous? Tungsten: one of the most (stable) mass dense metals around.
The TaylorMade P-790Ti iron has up to 119g of tungsten in each clubhead to push the limits of forgiveness and drive the center of gravity as far back and as low as possible—that’s why the titanium has been placed on the exterior of the club’s frame.
So now to that face.
Supported by TaylorMade’s SpeedFoam, the machined titanium face is thin to produce maximum ball speed. By machining it, rather than casting, TaylorMade can precisely control the dimensions to save every last bit of weight.
With a face this fast and a CG going so far back, Chris Berman would have to actually take a breath when telling you about it.
You need stronger lofts—it’s physics and function rather than playing a numbers game. Without the stronger lofts, each iron wouldn’t hit the proper window for its trajectory. The other part of this that is often overlooked is the target market for these styles of irons—players NOT at the top end of clubhead speed; players wanting a higher flight and longer distances. Yeah, it’s fun to watch tour players mash 7-irons 220 yards for the cameras—I wish I could do that—but that’s not who these clubs are designed for.
This leads us to the rest of the package.
Obviously, the term “stock” is now a loose reference to a suggested final build based on player testing, but this sheds light on the what TaylorMade wants to accomplish with these irons. The paired shafts are, for steel, the new Nippon NS Pro 950 GH Neo (an update to their extremely popular 950 GH). For graphite, the shaft of choice is the Mitsubishi MMT available in varies weight options—see below.
Neal Shipley was the first to admit that he enjoyed his food while in college. But since his days at Ohio State, he’s slimmed down and earned a PGA Tour Card.
That hasn’t stopped him from having fun with his wedge stampings, though it’s led to some misunderstandings.
On the 54 (degree), we have ‘Big Fudge,'” Shipley told GolfWRX. “It was supposed to be ‘Big Fridge,’ so this happened a little while ago. ‘Big Fridge’ was a nickname between my college teammates and I, with ‘fridge’ meaning stomach, a big stomach.
“We told the Ping guys to put … ‘Big Fridge’ on it, and I think maybe some bad cell service or something, and they thought I said ‘fudge,’ so they put fudge on it.”
On Shipley’s 50-degree he also continues the food theme, this time with his go-to order at the “Golden Arches,” and his stamping “DONS 7.”
“The number 7 meal, the two cheeseburger meal, that was my McDonald’s order, back when I would have McDonald’s frequently,” Shipley shared.
At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, @raw10628 has a L.A.B. DF3 putter and Masters putter cover up for grabs.
From the listing: “Some great items here today, time to thin out and make room for next set of gear. All prices include shipping.
LAB DF3 Purple 33.5” 68° lie with TPT – $725. LAB Masters release DF3 cover – $150.”
To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules
Driver: Ping G440 LST (9 degrees)
Shaft: Accra TourZ Green 5-M4
3-wood: Ping G440 Max (15 degrees)
Shaft: Accra TourZ Green 6-M4
5-wood: Ping G440 Max (19 degrees @18)
Shaft: Accra TourZ Green 6-M4
Hybrid: Ping G440 (23 degrees)
Shaft: Oban Isawa Red Hybrid Shaft 04 Flex 70 Gms
Irons: Srixon ZXi7 (5-P)
Shafts: Aerotech SteelFiber Private Reserve i80
Wedges: Cleveland RTZ (50-MID, 54-FULL, 58-MID)
Shafts: Aerotech SteelFiber Private Reserve i105
Putter: L.A.B. Golf OZ.1i
Shaft: ACCRA Putter Shaft
Grips: Golf Pride Tour Velvet
Aaron Rai’s winning WITB: 2026 PGA Championship
Russell Henley’s winning WITB: 2026 Charles Schwab Challenge
Photos from the 2026 CJ Cup Byron Nelson
CJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
Charles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
Details on J.J. Spaun’s surprise putter switch
GolfWRX Launch Report: 2026 Titleist GTS drivers
Photos from the 2026 Charles Schwab Challenge
PGA Championship Tour Report: Fitzpatrick, Koepka among big-name putter switches for Aronimink
Photos from the ShopRite LPGA
Maria Torres WITB 2026 (June)
Driver: Ping G440 LST (9 degrees) Shaft: Accra TourZ Green 5-M4 3-wood: Ping G440 Max (15 degrees) Shaft: Accra TourZ Green 6-M4 5-wood: Ping G440...
Eric Cole WITB 2026 (June)
Driver: PXG Lightning Tour Max (9 degrees) Shaft: Project X Titan Yellow 70 TX 3-wood: TaylorMade Qi4D (15 degrees) Shaft:...
Si Woo Kim WITB 2026 (May)
Driver: Callaway Quantum Triple Diamond (8.5 degrees) Shaft: Fujikura Ventus Black 6 X Mini driver: Callaway Paradym Ai Smoke Mini...
Wyndham Clark’s winning WITB: 2026 CJ Cup Byron Nelson
Driver: TaylorMade Qi4D (10.5 degrees) Shaft: Project X Titan Yellow 60 TX 3-wood: TaylorMade Qi4D Tour (15 degrees) Shaft: Project...
Aaron
Aug 13, 2019 at 7:45 am
4.5g to 8g is not 43% heavier.
It’s 43% lighter
the truth
Aug 13, 2019 at 6:29 am
$400 per club AND you need more wedges?
Andy
Aug 13, 2019 at 5:26 am
The AW has finally broken through 50 degrees and 43.5 degree PW. Wow.
Pillow Talk
Aug 13, 2019 at 4:07 am
$2700? That’s all? 😀
Moses
Aug 12, 2019 at 10:30 pm
Wow I can probably hit the 9 iron 150 yards.
Eric
Aug 12, 2019 at 7:52 pm
I’d like to see the P790Ti UDI, with the same aesthetics and 14-17* of loft. Looks so much better than the GAPR in my opinion. Just change where the tungsten is placed to get High/Mid/Lo equivalent of GAPR.
Stewart
Aug 12, 2019 at 5:16 pm
These look great but I’m not likely to buy at this price.
I’ve no issue with companies having a product at this level.
KC
Aug 12, 2019 at 5:00 pm
$2700 for a 7 club set of irons. Go home Taylormade…you’re drunk.
JP
Aug 12, 2019 at 9:39 pm
Drunk and stupid at the same time.
Clay
Aug 12, 2019 at 4:47 pm
5.5 degree gaps in the short irons? yikes
Travisty
Aug 12, 2019 at 4:17 pm
Pure Premium Pricing—fixed that for you
jason
Aug 12, 2019 at 12:30 pm
look how the masacred my boy.
Bushwood Caddie
Aug 12, 2019 at 11:30 am
Running out of ideas to have a different type of club for every release? Their big tech is ICT (inverted cone technology) which they had back several years ago. Nice irons, but not at that price!
dat
Aug 12, 2019 at 10:37 am
NO. Please for the love of Golf stop with these joker clubs.
Ted
Aug 12, 2019 at 9:24 am
Ugly
JP
Aug 12, 2019 at 9:08 am
And the price? A gazillion dollars a set?
.
And the face is cast THEN machined. Do t let the wording confuse. It’s cast.