Equipment
Justin Thomas inspires Scotty Cameron’s new Futura 5.5M putter
In July 2016, Justin Thomas visited Scotty Cameron’s Putter Studio looking for a new flatstick. He wanted a compact mallet putter that would work for his arcing putting stroke, which required a custom solution from the Scotty Cameron team.
“We welded a flare neck to a Futura X5 Tour putter and sent him on his way,” Scotty Cameron said. He went on to win three events, reporting back that some of his buddies wanted a putter like his. The wheels started turning from there.”
The “turning wheels” inside Cameron’s head led him to create an all-new putter inspired by Thomas’ request, the Futura 5.5M. The new putter is about 10 percent smaller than the Futura 7M putter that it resembles. Unlike the 7M, however, it has what’s known as toe hang, or “toe flow,” a design that tends to work well for golfers with arcing putting strokes.
Scotty Cameron Futura 5.5M at address.
“To achieve [toe flow], I created a leaned over, stainless steel half-neck spud off the topline that accepts a single bend shaft,” Scotty Cameron said. “This is an elegant way to give the player a full shaft of offset and also offer a clean view of the entire leading edge of the topline. The proportion is right. The weight is right. And now we have a mallet with more toe flow for players who like that arcing feel in their stroke, but want more forgiveness.”
The Futura 5.5M has a Silver Mist finish.
Like the rest of the Futura putter line, the Futura 5.5M ($379) has a multi-material construction of 6061 aircraft aluminum and 303 stainless steel. Its wrap-around face sole design pushes weight to the perimeter of the putter head for added forgiveness. It’s available in stores August 25 in North America and September 25 worldwide.
Neal Shipley was the first to admit that he enjoyed his food while in college. But since his days at Ohio State, he’s slimmed down and earned a PGA Tour Card.
That hasn’t stopped him from having fun with his wedge stampings, though it’s led to some misunderstandings.
On the 54 (degree), we have ‘Big Fudge,'” Shipley told GolfWRX. “It was supposed to be ‘Big Fridge,’ so this happened a little while ago. ‘Big Fridge’ was a nickname between my college teammates and I, with ‘fridge’ meaning stomach, a big stomach.
“We told the Ping guys to put … ‘Big Fridge’ on it, and I think maybe some bad cell service or something, and they thought I said ‘fudge,’ so they put fudge on it.”
On Shipley’s 50-degree he also continues the food theme, this time with his go-to order at the “Golden Arches,” and his stamping “DONS 7.”
“The number 7 meal, the two cheeseburger meal, that was my McDonald’s order, back when I would have McDonald’s frequently,” Shipley shared.
At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, @raw10628 has a L.A.B. DF3 putter and Masters putter cover up for grabs.
From the listing: “Some great items here today, time to thin out and make room for next set of gear. All prices include shipping.
LAB DF3 Purple 33.5” 68° lie with TPT – $725. LAB Masters release DF3 cover – $150.”
To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules
Driver: Ping G440 LST (9 degrees)
Shaft: Accra TourZ Green 5-M4
3-wood: Ping G440 Max (15 degrees)
Shaft: Accra TourZ Green 6-M4
5-wood: Ping G440 Max (19 degrees @18)
Shaft: Accra TourZ Green 6-M4
Hybrid: Ping G440 (23 degrees)
Shaft: Oban Isawa Red Hybrid Shaft 04 Flex 70 Gms
Irons: Srixon ZXi7 (5-P)
Shafts: Aerotech SteelFiber Private Reserve i80
Wedges: Cleveland RTZ (50-MID, 54-FULL, 58-MID)
Shafts: Aerotech SteelFiber Private Reserve i105
Putter: L.A.B. Golf OZ.1i
Shaft: ACCRA Putter Shaft
Grips: Golf Pride Tour Velvet
Aaron Rai’s winning WITB: 2026 PGA Championship
Russell Henley’s winning WITB: 2026 Charles Schwab Challenge
Photos from the 2026 CJ Cup Byron Nelson
CJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
Charles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
Details on J.J. Spaun’s surprise putter switch
GolfWRX Launch Report: 2026 Titleist GTS drivers
Photos from the 2026 Charles Schwab Challenge
PGA Championship Tour Report: Fitzpatrick, Koepka among big-name putter switches for Aronimink
Photos from the ShopRite LPGA
Maria Torres WITB 2026 (June)
Driver: Ping G440 LST (9 degrees) Shaft: Accra TourZ Green 5-M4 3-wood: Ping G440 Max (15 degrees) Shaft: Accra TourZ Green 6-M4 5-wood: Ping G440...
Eric Cole WITB 2026 (June)
Driver: PXG Lightning Tour Max (9 degrees) Shaft: Project X Titan Yellow 70 TX 3-wood: TaylorMade Qi4D (15 degrees) Shaft:...
Si Woo Kim WITB 2026 (May)
Driver: Callaway Quantum Triple Diamond (8.5 degrees) Shaft: Fujikura Ventus Black 6 X Mini driver: Callaway Paradym Ai Smoke Mini...
Wyndham Clark’s winning WITB: 2026 CJ Cup Byron Nelson
Driver: TaylorMade Qi4D (10.5 degrees) Shaft: Project X Titan Yellow 60 TX 3-wood: TaylorMade Qi4D Tour (15 degrees) Shaft: Project...
Geoff
Aug 2, 2017 at 12:19 pm
Another ‘Inspired By’ that isn’t like the model it’s inspired by. Another joke from Cameron.
Will
Aug 2, 2017 at 9:03 am
This is not inspired by justin Thomas any more than it was inspired by anyone else who uses a smaller mallet. They know we want a flow neck version. Not sure why they won’t make one. Im tired of waiting though. I’m getting the new odyssey 7 with a flow neck when they are available.
UnclePhil
Aug 1, 2017 at 3:20 pm
Sigh!
BusterG
Aug 1, 2017 at 2:29 pm
Available Aug 25 and I will be at my golf store at opening time to grab one of these booyah beauties
JB
Aug 1, 2017 at 12:38 pm
JT’s looks way better. This is a cop out.
AndyUK
Aug 1, 2017 at 10:54 am
Hmmm…that isn’t a flow neck last time I checked. Looks like he’s gone down the cheap route?
Massive FAIL!
David
Aug 1, 2017 at 10:06 am
Why wont they make JT’s putter or the one Jordan used for one week!? Terrible terrible terrible
Rich
Aug 21, 2017 at 7:20 pm
Because if they did, there wouldn’t be the “Tour only” putters that he can sell for thousands, just cause it’s got a certain stamp on it. I don’t mind Scotty Cameron putters but bloody hell they take people for a ride with all the bull that goes along with it.
Harry Doyle
Aug 1, 2017 at 9:50 am
Swing and a miss
DB
Aug 1, 2017 at 9:44 am
This is pretty nice, look forward to trying it. But I prefer the look of the straight shaft and flow-neck.
JD
Aug 1, 2017 at 9:07 am
When you go on a blind date and she looks nothing like her profile picture.
Jerry
Aug 1, 2017 at 8:55 am
I like Justin Thomas’ putter hosel.
LeftyRizer
Aug 1, 2017 at 12:32 pm
I agree 100%. Every other manufacturer is putting out a straight shaft flow-neck. That’s what players want. This is just a cheap knock-off….well, at $379 cheap may not be the right word.