Equipment
TaylorMade extends AeroBurner line with Mini Driver
TaylorMade’s AeroBurner Mini Driver exists in the space between the company’s drivers and fairway woods, and that’s the beauty of it.
Buzz around the Mini Driver category reached new heights after the 2015 Honda Classic, where it earned its first PGA Tour win. Padraig Harrington used TaylorMade’s original Mini Driver — a 12-degree SLDR S — as a driver alternative in route to his first PGA Tour victory since 2008.
[quote_box_center]”It’s too soon to tell, but it could be a category that becomes as popular as our rescue clubs,” said TaylorMade’s Senior Director of Product Creation Brian Bazzel. “Demand [for the SLDR S Mini Driver] was greater than we expected.” [/quote_box_center]
The new Mini Driver has a marginally smaller head size — 253 cubic centimeters, which is 9 cubic centimeters less than the original. That makes it substantially bigger than a fairway wood, for more forgiveness from the tee, but small enough that golfers can hit it off the ground if necessary.
The biggest changes to the club, however, revolve not around its size, but its sole and its shape.
At address: TaylorMade’s AeroBurner Mini Driver (left) and AeroBurner Driver.
Like the AeroBurner metal woods, the AeroBurner Mini Driver uses the company’s latest Speed Pocket, a deep slot that extends across the entirety of its sole. According to Bazzel, the Speed Pocket increases the AeroBurner’s sweet spot, allowing it to launch the ball with slightly more ball speed and a little less spin (about 100-to-200 rpm) than the SLDR Mini Driver.
The sole of the club is also flatter, a change that will make the Mini Driver easier to use from the fairway and light rough, and it borrows the more aerodynamic shape of the AeroBurner metal woods. Its crown has a raised center that gently slopes from the front of the club to the back, and a “fin” on its hosel are both said to improve aerodynamics.
Related: Click here to learn about TaylorMade’s AeroBurner irons.
Golfers comparing the AeroBurner Mini Driver to the SLDR S Mini Driver will notice that the AeroBurner shape at address is more symmetrical, whereas the SLDR S was more elongated in its back toe section.
As for the results? Our internal testing has seen some golfers hit the Mini Driver just as far and much straighter than their regular driver, but there are a lot of different variables at play. They include:
- The Mini Driver’s 43.5-inch length, which is roughly 2-inches shorter than a driver.
- Its smaller head size, which is easier for many golfers to square at impact.
- The increased loft, relative to a driver, which helps many golfers launch the ball higher and with less spin — one of the keys to more distance.
The bottom line is this: If you find yourself using your lowest-lofted fairway wood primarily from the tee, why wouldn’t you want its head to be bigger, and thus more forgiving?
At address: TaylorMade’s AeroBurner Mini Driver and AeroBurner Mini Driver TP (right).
The AeroBurner Mini Driver ($279) is available in lofts of 12, 14 and 16 degrees (RH only) and comes stock with Matrix’s Speed RUL-Z 60 shaft.
A TP version ($349), which has a flatter lie angle and more open face angle for more fade bias, is also available in lofts of 12 and 14 degrees (both RH only). It comes stock with a Matrix White Tie MSS 70X4 shaft.
They’ll be in stores March 27.
Click here to see what GolfWRX Members are saying about the AeroBurner Mini Drivers in our forum.
Specs
Neal Shipley was the first to admit that he enjoyed his food while in college. But since his days at Ohio State, he’s slimmed down and earned a PGA Tour Card.
That hasn’t stopped him from having fun with his wedge stampings, though it’s led to some misunderstandings.
On the 54 (degree), we have ‘Big Fudge,'” Shipley told GolfWRX. “It was supposed to be ‘Big Fridge,’ so this happened a little while ago. ‘Big Fridge’ was a nickname between my college teammates and I, with ‘fridge’ meaning stomach, a big stomach.
“We told the Ping guys to put … ‘Big Fridge’ on it, and I think maybe some bad cell service or something, and they thought I said ‘fudge,’ so they put fudge on it.”
On Shipley’s 50-degree he also continues the food theme, this time with his go-to order at the “Golden Arches,” and his stamping “DONS 7.”
“The number 7 meal, the two cheeseburger meal, that was my McDonald’s order, back when I would have McDonald’s frequently,” Shipley shared.
At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, @raw10628 has a L.A.B. DF3 putter and Masters putter cover up for grabs.
From the listing: “Some great items here today, time to thin out and make room for next set of gear. All prices include shipping.
LAB DF3 Purple 33.5” 68° lie with TPT – $725. LAB Masters release DF3 cover – $150.”
To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules
Driver: Ping G440 LST (9 degrees)
Shaft: Accra TourZ Green 5-M4
3-wood: Ping G440 Max (15 degrees)
Shaft: Accra TourZ Green 6-M4
5-wood: Ping G440 Max (19 degrees @18)
Shaft: Accra TourZ Green 6-M4
Hybrid: Ping G440 (23 degrees)
Shaft: Oban Isawa Red Hybrid Shaft 04 Flex 70 Gms
Irons: Srixon ZXi7 (5-P)
Shafts: Aerotech SteelFiber Private Reserve i80
Wedges: Cleveland RTZ (50-MID, 54-FULL, 58-MID)
Shafts: Aerotech SteelFiber Private Reserve i105
Putter: L.A.B. Golf OZ.1i
Shaft: ACCRA Putter Shaft
Grips: Golf Pride Tour Velvet
Aaron Rai’s winning WITB: 2026 PGA Championship
Russell Henley’s winning WITB: 2026 Charles Schwab Challenge
Photos from the 2026 CJ Cup Byron Nelson
CJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
Charles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
Details on J.J. Spaun’s surprise putter switch
GolfWRX Launch Report: 2026 Titleist GTS drivers
Photos from the 2026 Charles Schwab Challenge
PGA Championship Tour Report: Fitzpatrick, Koepka among big-name putter switches for Aronimink
Photos from the ShopRite LPGA
Maria Torres WITB 2026 (June)
Driver: Ping G440 LST (9 degrees) Shaft: Accra TourZ Green 5-M4 3-wood: Ping G440 Max (15 degrees) Shaft: Accra TourZ Green 6-M4 5-wood: Ping G440...
Eric Cole WITB 2026 (June)
Driver: PXG Lightning Tour Max (9 degrees) Shaft: Project X Titan Yellow 70 TX 3-wood: TaylorMade Qi4D (15 degrees) Shaft:...
Si Woo Kim WITB 2026 (May)
Driver: Callaway Quantum Triple Diamond (8.5 degrees) Shaft: Fujikura Ventus Black 6 X Mini driver: Callaway Paradym Ai Smoke Mini...
Wyndham Clark’s winning WITB: 2026 CJ Cup Byron Nelson
Driver: TaylorMade Qi4D (10.5 degrees) Shaft: Project X Titan Yellow 60 TX 3-wood: TaylorMade Qi4D Tour (15 degrees) Shaft: Project...
RG
Mar 12, 2015 at 3:44 pm
I have an old school Callaway Big bertha 11 degree club. It was considered a ladies driver. I put a neww shaft in it and let me tell u off the deck or of the tee I’ll put it against any of these new “mini drivers.” It is hot and very accurate. This is not a new concept and there are clubs out there that are better and 1/3 the cost.
james
Mar 11, 2015 at 1:31 pm
cant wait to get one of these! oh wait I cant as I’m a leftie
Justin
Mar 11, 2015 at 12:09 pm
It’s really frustrating that it seems for this year, TaylorMade feels that there are no lefties who want TP clubs. As a lefty whose miss is a draw, I need the square to open face of a TP model.
Leon
Mar 11, 2015 at 11:49 am
Cut your driver shaft to 43 inches, your driver will be much more forgiving than the mini ones. It will hit the ball much longer too, not only because of the lower loft of the driver, but also due to the higher COR from the Titanium face than the steel face.
Plus, it will not cost you a stupid $300, but rather a reasonable $20 for a new grip and some lead tapes to bring the swing weight back to your comfort zone.
GW
Mar 11, 2015 at 11:45 am
My favorite “mini driver” of all time is the original R7 line. I don’t see a point in buying a brand new driver that is smaller just so I can fill a gap between a driver and a 3 wood. Now, if I hit it as far as my current driver, or close to it, and kept it in the fairway more often then I might be interested in that.
gwillis7
Mar 11, 2015 at 11:31 am
I always struggle from the tee….use a jetspeed and it has given me my best results (I only slice 3 out of 10 times from the tee now lol). But I will give this a try, if I can keep most my shots straight and only lose 15 yards or so I would jump on board. Not a TM guy, I am a Ping fan by far, but don’t mind their product cycle and I think a lot of their stuff looks good (not all, but a lot).
gwillis7
Mar 11, 2015 at 3:44 pm
Ok I just saw on TM website that they are gonna make aeroburner irons….The loft of the 4 iron is 19 degrees…19!!
The PW is 43 and the AW is 49….
I don’t care about them coming out with new stuff every 6 months, I don’t have to buy it. But I don’t like the fact that lofts have gotten absolutely crazy….4 iron that is 19 degrees, that’s just stupid
Chad
Mar 11, 2015 at 10:49 am
I bet this thing is stupid long.
Cally
Mar 11, 2015 at 10:46 am
Stop this product cycle comments….if you don’t like it don’t buy it, easy as that.
marty
Mar 11, 2015 at 11:03 am
Those are guys who are cheap and can’t afford new clubs.
Josh
Mar 11, 2015 at 10:07 am
That didn’t take long.
Looks like the market cycle is getting even faster.