Equipment
Cameron Studio Select Announced
For quite a while, Scotty Cameron fans have been longing for a putter that was reminiscent of the original Studio Stainless line.
Clean lines, simple visuals, and no insert are just a few of the changes many golfers wanted to see in the update to the Studio Style series. It seems that Cameron is paying close attention to what his fans want, because the announcement of the Studio Select putters this week seems to include everything golfers have been asking for with a few improvements added for good measure. The biggest change with this line is the amount of customization possible. Head weight, shaft length, lie angle, neck style, and grip can be selected to fit a golfer’s individual preferences. The Studio Select will be made from 303 stainless steel and feature three prominent red dots in the cavity and face which are very popular on Cameron’s Tour putters including one belonging to a Mr. Eldrich “Tiger” Woods.
In his previous models, Cameron held fast to head weights which corresponded directly to shaft length. The shorter the putter, the heavier the head needed to be in order to maintain proper feel. The Studio Select has two circular weights drilled into the sole so head weight can change to fit the corresponding shaft length. According to Scotty Cameron, “Most putter heads are only weighted for 35-inch shafts and therefore, are much too light for shorter lengths, or too heavy for longer lengths. Too often the same heads are placed in shafts of all lengths. The result is the golfer having to hit at the ball instead of being able to stroke the ball, and that creates distance control problems. The Studio Select putter line delivers a wide range of specifications and options, designed to accommodate a wider range of golfer requirements.”
In addition, the Studio Select will also be offered in two head shapes, Newport and Newport 2 as well as three different neck styles including plumbers, short flair, and the mid slant neck many golfers have missed. Not only can golfers pick a putter that suits their eye, but they now have a tremendous amount of control over the amount of toe hang on the putter. So a putter can now fit your stroke as well as your eye.
The lie angle of the putter can be adjusted anywhere from 69 to 73 degrees. The standard grip will be the new red Cameron Cord, although six different grip options are possible including, Black Studio Design, Red Studio Design, Black Baby T, Red Baby T, and Red Winn AVS Midsize. The Studio Select putters will be available March 15 at a MSRP of $325.
Neal Shipley was the first to admit that he enjoyed his food while in college. But since his days at Ohio State, he’s slimmed down and earned a PGA Tour Card.
That hasn’t stopped him from having fun with his wedge stampings, though it’s led to some misunderstandings.
On the 54 (degree), we have ‘Big Fudge,'” Shipley told GolfWRX. “It was supposed to be ‘Big Fridge,’ so this happened a little while ago. ‘Big Fridge’ was a nickname between my college teammates and I, with ‘fridge’ meaning stomach, a big stomach.
“We told the Ping guys to put … ‘Big Fridge’ on it, and I think maybe some bad cell service or something, and they thought I said ‘fudge,’ so they put fudge on it.”
On Shipley’s 50-degree he also continues the food theme, this time with his go-to order at the “Golden Arches,” and his stamping “DONS 7.”
“The number 7 meal, the two cheeseburger meal, that was my McDonald’s order, back when I would have McDonald’s frequently,” Shipley shared.
At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, @raw10628 has a L.A.B. DF3 putter and Masters putter cover up for grabs.
From the listing: “Some great items here today, time to thin out and make room for next set of gear. All prices include shipping.
LAB DF3 Purple 33.5” 68° lie with TPT – $725. LAB Masters release DF3 cover – $150.”
To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules
Driver: Ping G440 LST (9 degrees)
Shaft: Accra TourZ Green 5-M4
3-wood: Ping G440 Max (15 degrees)
Shaft: Accra TourZ Green 6-M4
5-wood: Ping G440 Max (19 degrees @18)
Shaft: Accra TourZ Green 6-M4
Hybrid: Ping G440 (23 degrees)
Shaft: Oban Isawa Red Hybrid Shaft 04 Flex 70 Gms
Irons: Srixon ZXi7 (5-P)
Shafts: Aerotech SteelFiber Private Reserve i80
Wedges: Cleveland RTZ (50-MID, 54-FULL, 58-MID)
Shafts: Aerotech SteelFiber Private Reserve i105
Putter: L.A.B. Golf OZ.1i
Shaft: ACCRA Putter Shaft
Grips: Golf Pride Tour Velvet
Aaron Rai’s winning WITB: 2026 PGA Championship
Russell Henley’s winning WITB: 2026 Charles Schwab Challenge
Photos from the 2026 CJ Cup Byron Nelson
CJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
Charles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
Details on J.J. Spaun’s surprise putter switch
GolfWRX Launch Report: 2026 Titleist GTS drivers
Photos from the 2026 Charles Schwab Challenge
PGA Championship Tour Report: Fitzpatrick, Koepka among big-name putter switches for Aronimink
Photos from the ShopRite LPGA
Maria Torres WITB 2026 (June)
Driver: Ping G440 LST (9 degrees) Shaft: Accra TourZ Green 5-M4 3-wood: Ping G440 Max (15 degrees) Shaft: Accra TourZ Green 6-M4 5-wood: Ping G440...
Eric Cole WITB 2026 (June)
Driver: PXG Lightning Tour Max (9 degrees) Shaft: Project X Titan Yellow 70 TX 3-wood: TaylorMade Qi4D (15 degrees) Shaft:...
Si Woo Kim WITB 2026 (May)
Driver: Callaway Quantum Triple Diamond (8.5 degrees) Shaft: Fujikura Ventus Black 6 X Mini driver: Callaway Paradym Ai Smoke Mini...
Wyndham Clark’s winning WITB: 2026 CJ Cup Byron Nelson
Driver: TaylorMade Qi4D (10.5 degrees) Shaft: Project X Titan Yellow 60 TX 3-wood: TaylorMade Qi4D Tour (15 degrees) Shaft: Project...
Mike
Feb 15, 2008 at 11:51 am
With this weighting will you have an option to weight the heal heavy in an attempt to make face balanced or close to.
Blaine B.
Feb 1, 2008 at 8:12 pm
The fitting options are great, but I don’t think this new line is as visually appealing as the Studio Style.
boysel21
Jan 28, 2008 at 4:59 pm
What will be the heaviest total weight the head will be available in?
Glfwrxnut
Jan 27, 2008 at 11:27 am
Nice way to keep cost down for Titleist. Make one head and weight to shaft length.
Can’t wait to see these in stores.
Jimmy James
Jan 26, 2008 at 1:37 am
There is not a 2.5 model offered.
The 4 models offered are:
Newport, Newport 1.5, Newport 2, & Newport 2 Mid Slant.
Bill O.
Jan 25, 2008 at 7:54 pm
Are there any Camerons available in 48″ length?
K Vakamudi
Jan 25, 2008 at 6:14 pm
Karl,
The Newport 2.5 will have the “Short Flair” which is the Santa Fe neck.
Eric,
The only lefty model will be the Newport 2 in 33, 34, 35″.
Eric R
Jan 25, 2008 at 4:48 pm
What head and neck styles will be available left handed?
Karl Van Norman
Jan 25, 2008 at 10:17 am
Will it be available with the Santa Fe style neck?
K Vakamudi
Jan 24, 2008 at 11:31 pm
Rich,
Shouldn’t be a problem getting one at any store around late March or early April.
I would imagine checking with one of our sponsors would give the opportunity to pre-order one as well if you’re that impatient.
Rich Clapper
Jan 24, 2008 at 10:45 pm
I have been anticipating the release of this putter since I saw a sales sample online. This may be a novice question, but will I be able to walk into Golf Galaxy and purchase one of these, or are they only going to be availbel via ordering?
John Happel
Jan 23, 2008 at 10:41 pm
This is the best Newport series from Cameron in years. The classic lines, no insert, personalized weights/lengths/necks all demonstrate attention to detail and responsiveness to customer feedback. If it performs as well as the Studio Stainless line, I think this will be a great success.
The only thing I see that is a negative is the inability for the customer to adjust the weight (via a weight kit). We’ll see how long Cameron holds out on the opportunity to up-sell an additional accessory!
Greg Gronberg
Jan 23, 2008 at 5:45 pm
Only issue I see is you can still only order 35/330, 34/340, or 33/350 no other combination. It then has to be sent in to change.
Greg