Equipment
Vokey opens its Tour Department to the public
Call it WedgeWorks on steroids.
Titleist has announced that the custom wedge grinding services it offers to its tour players will be available to the public starting June 19.
Titleist calls the program “WedgeWorks Hand Ground,” and it will allow consumers to order 58- or 60-degree wedges in custom grinds that have previously only been available to tour players.
The wedges will retail for $350, and will be hand ground by the same master craftsman on the same grinding wheels as those made for Steve Stricker, Zach Johnson, Adam Scott, Jason Dufner and many other PGA Tour winners.
The Hand Ground wedges will be available in the following tour-only grinds:
- V Grind (left): Its crescent-shaped sole has plenty of bounce in the front to prevent digging. But it has a narrow sole and minimal camber that allows versatility around the greens. According to Vokey.com, the V Grind is great for players with steep angles of attack, or those who play in soft conditions.
- E Grind (middle): Its medium-width sole has a straight relieved trailing edge. It also has a slight heel camber that allows it to be played in the opened position, and additional heel relief can be added by request. Its forgiving sole is great for medium-to-steep angles of attack, and is most effective in soft conditions.
- T Grind (right): The T Grind was inspired by Champions Tour player Tom Pernice. Its crescent-shaped, thin flat sole has ample relief in the heel, toe and trailing edge sections. It also has a narrow forward bounce section and a medium amount of camber that plays well in tight, firm conditions, and is great for players with shallower angles of attack.
Vokey’s M Grind, which is available on Vokey retail models 54-11, 56-11, 58-12 and 60-10, is another option through the Hand Ground program. It’s one of Vokey’s most versatile soles, with a medium amount of camber and bounce and ample relief in the heel, toe and trailing edge areas.
More exclusives
Each hand ground wedge will come in a tour-only raw finish, which allows wedges to be shaped in nearly any way. Golfers can choose to have their wedges made with a square toe, straighter leading edge, beveled top line, pre-worn leading edge, or a pro-groove — a subtle channel in the center of the sole that is used by Webb Simpson on his 58-degree Vokey TVD-M wedge.
According to Vokey, the pro-groove moves the contact point of the wedge slightly forward, which allows golfers to more easily use the bounce on short pitches to prevent digging.
Like Vokey’s WedgeWorks program, golfers can choose to have their wedges customized with different stampings — eight different letter/number combinations in “straight,” “freestyle,” “staircase” or “snow” — and 12 different paintfill colors. All the shafts, grips, ferrules, weight porting and shaft bands offered through Vokey’s WedgeWorks program will also be available.
Golfers will also have the choice of the following WedgeWorks Hand Ground exclusive stamps: “Prototype 2013,” “Hand Ground, “Special Grind” and “BVHG” (Bob Vokey Hand Ground). They can also choose “Spin Milled,” the name for the high-friction grooves that are milled into each Vokey wedge.
Wedges that are ordered through the Hand Ground program will have a hand-stamped hosel code, and the grinder’s initials will be stamped on the wedges as well. For example, wedges ground by Vokey Tour Rep Aaron Dill will be stamped “AD,” while wedges ground by Vokey himself will be stamped “BV.”
According to David Neville, Vokey marketing manager, the company will call every customer who makes an order through WedgeWorks Hand Ground to make sure they know exactly what wedge grinds they’ve ordered and confirm that it will work for them.
Titleist expects that turnaround time on orders to be between two and three weeks.
Neal Shipley was the first to admit that he enjoyed his food while in college. But since his days at Ohio State, he’s slimmed down and earned a PGA Tour Card.
That hasn’t stopped him from having fun with his wedge stampings, though it’s led to some misunderstandings.
On the 54 (degree), we have ‘Big Fudge,'” Shipley told GolfWRX. “It was supposed to be ‘Big Fridge,’ so this happened a little while ago. ‘Big Fridge’ was a nickname between my college teammates and I, with ‘fridge’ meaning stomach, a big stomach.
“We told the Ping guys to put … ‘Big Fridge’ on it, and I think maybe some bad cell service or something, and they thought I said ‘fudge,’ so they put fudge on it.”
On Shipley’s 50-degree he also continues the food theme, this time with his go-to order at the “Golden Arches,” and his stamping “DONS 7.”
“The number 7 meal, the two cheeseburger meal, that was my McDonald’s order, back when I would have McDonald’s frequently,” Shipley shared.
At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, @raw10628 has a L.A.B. DF3 putter and Masters putter cover up for grabs.
From the listing: “Some great items here today, time to thin out and make room for next set of gear. All prices include shipping.
LAB DF3 Purple 33.5” 68° lie with TPT – $725. LAB Masters release DF3 cover – $150.”
To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules
Driver: Ping G440 LST (9 degrees)
Shaft: Accra TourZ Green 5-M4
3-wood: Ping G440 Max (15 degrees)
Shaft: Accra TourZ Green 6-M4
5-wood: Ping G440 Max (19 degrees @18)
Shaft: Accra TourZ Green 6-M4
Hybrid: Ping G440 (23 degrees)
Shaft: Oban Isawa Red Hybrid Shaft 04 Flex 70 Gms
Irons: Srixon ZXi7 (5-P)
Shafts: Aerotech SteelFiber Private Reserve i80
Wedges: Cleveland RTZ (50-MID, 54-FULL, 58-MID)
Shafts: Aerotech SteelFiber Private Reserve i105
Putter: L.A.B. Golf OZ.1i
Shaft: ACCRA Putter Shaft
Grips: Golf Pride Tour Velvet
Aaron Rai’s winning WITB: 2026 PGA Championship
Russell Henley’s winning WITB: 2026 Charles Schwab Challenge
Photos from the 2026 CJ Cup Byron Nelson
CJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
Charles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
Details on J.J. Spaun’s surprise putter switch
GolfWRX Launch Report: 2026 Titleist GTS drivers
Photos from the 2026 Charles Schwab Challenge
PGA Championship Tour Report: Fitzpatrick, Koepka among big-name putter switches for Aronimink
Photos from the ShopRite LPGA
Maria Torres WITB 2026 (June)
Driver: Ping G440 LST (9 degrees) Shaft: Accra TourZ Green 5-M4 3-wood: Ping G440 Max (15 degrees) Shaft: Accra TourZ Green 6-M4 5-wood: Ping G440...
Eric Cole WITB 2026 (June)
Driver: PXG Lightning Tour Max (9 degrees) Shaft: Project X Titan Yellow 70 TX 3-wood: TaylorMade Qi4D (15 degrees) Shaft:...
Si Woo Kim WITB 2026 (May)
Driver: Callaway Quantum Triple Diamond (8.5 degrees) Shaft: Fujikura Ventus Black 6 X Mini driver: Callaway Paradym Ai Smoke Mini...
Wyndham Clark’s winning WITB: 2026 CJ Cup Byron Nelson
Driver: TaylorMade Qi4D (10.5 degrees) Shaft: Project X Titan Yellow 60 TX 3-wood: TaylorMade Qi4D Tour (15 degrees) Shaft: Project...
Dino
May 30, 2013 at 2:22 pm
They’ll just be grinding up tour reject heads…Titleist left out the most important factor. Quality of metal tour players get versus what these heads will be made of. I have a couple tour wedges that have amazing feel and the outside looks like everyday chrome…well the chrome flaked away and underneath is pure copper. Hmmm
Ben
May 31, 2013 at 11:15 am
pics?
jb
May 29, 2013 at 8:15 pm
Well what is so different about these wedges then the Scotty Camreon putters? Aren’t those the same people Titleist is targeting now? I think they’ll sell more than enough!
Curt
May 29, 2013 at 9:03 pm
Putters can last a lifetime, wedges last one or two seasons depending on play, so not a good comparison.
J
May 29, 2013 at 5:07 pm
JP Wedges cost that much and you definately get a unique wedge for that much
Todd
May 29, 2013 at 3:57 pm
The best part is that for $350 Vokey may or may not grind it himself. Hell, for this price you may as well just charge $800 for him to do it and $350 for the other guy nobody knows. Anyone crazy enough to pay $350 is willing to pay $800.
Ben
May 29, 2013 at 11:29 am
Miura Golf is holding on line 1…
Bob
May 29, 2013 at 11:26 am
I bought 3 Vokey’s custom 1 inch longer and 3 up. Swing weight as received, E-5. They would not adjust swing weight. I sent them to Hot Stix to be adjusted. For what these cost, custom work should be better, easier and less expensive.
danny
May 29, 2013 at 3:55 pm
But Bob Vokey might walk by while your club is getting worked on here, that’s a great experience that your club will have for a lifetime. He might event touch it which will give you 3 extra hole outs over an off the rack Vokey.
Mick J
May 29, 2013 at 4:36 pm
You must be 8′ tall
danny
May 29, 2013 at 10:54 am
For the record, I have 3 Vokey wedges in my bag, but I see no value in having to pay $350 for Bob Vokey (or maybe his dude) to possibly grind my wedge.
Mike D.
May 29, 2013 at 9:56 am
Or serving a niche market segment, who feel the $350 is justified….
Kevin
May 29, 2013 at 10:48 am
Great move. There is definitely a market for this.
Danny
May 29, 2013 at 12:14 am
Lol $350. They have to be joking or arrogant
Curt
May 29, 2013 at 9:15 am
+1 – that is rediculous, unless they give an “up and down” guarantee along with it! Sorry, no need to overpay, just to over feed my ego!!
Dave
May 29, 2013 at 1:40 pm
Definitely just paying for the experience so you can say “these were hand ground”. I’m sure people will jump all over it though. I’d rather have them done at a custom shop though.