Connect with us

Equipment

Building the Bag: For Ryan Gerard, it’s all about launch and finding the right flatstick

Published

on

On the next installment, we’re diving into the bag of a serial tinkerer – and we mean that in a good way. PGA Tour winner Ryan Gerard grinds harder than most in the game. He even made a 10,000-mile trip from the U.S. to Mauritius to earn himself a spot in this year’s Masters. 

He takes that same attitude to his bag setup, always looking for new equipment to test to see if he can get to the next level. 

For Gerard, a lot of the bag focuses on one aspect – launching the golf ball. The American is first to admit that his swing fundamentals mean that he delofts the club more than most at impact, so his clubs are fit accordingly.

Driver: Titleist GT3 11 degree (Mitsubishi Tensei 1K Blue 60 X) C3 SureFit

With an 11-degree head, set at C3 in the Titleist SureFit adapter (+.75 degrees), Gerard’s driver is set up to do one thing. Get it in the air. 

“It’s a lot of loft, but I do tend to deloft it a little bit,” Gerard said. 

Along with the higher loft on the face, Gerard’s GT3 features plenty of back-weighting to shift the center of gravity rearward to help increase the launch angle and also spin. 

“It helps my start lines be a little more consistent,” Gerard added. “It’s kind of a heavier shell with like a slightly lighter track weight, which has helped me find what I’m looking for in flight and spring off the tee.”

Gerard predominantly plays a left-to-right shot off the tee, averaging just 89 feet in apex height, well below the PGA Tour average, and believes that his spin is on the higher side, up to 2800 rpm on some hits. 

“I could probably gain a few yards if I dropped spin, but I’m really looking to hit the window and keep it in the fairway.  

Woods: TaylorMade Qi10 HL 3-wood 16.5 degree (Fujikura Ventus TR Red 7X), TaylorMade Qi35 9-wood 24 degree (Fujikura Ventus TR Red 7X)

Gerard’s 3-wood didn’t come from a Tour truck, and it wasn’t sent to him to try out. 

“I actually bought this online,” Gerard told GolfWRX. “I’ve gone through three or four 3-woods and I just keep buying them online because they’re still available, so please don’t buy all of them because I might go buy more.”

The high-lofted 3-wood, which helps Gerard achieve a better descent angle and apex, is one of two TaylorMade woods he’s added to his setup, thanks to the forgiveness they offer when hitting them off the turf and allowing Gerard to use them off the tee. 

He also uses a Qi35 9-wood, which reads at 24 degrees, but in fact, he’s bent it down closer to 22 to help with gapping. 

“If I took a 7-wood and added loft, it would look more shut to me,” Gerard said. “But taking a 9-wood and bending it down, it gives the flight and trajectory that I’m looking for, which is high and spinny, but looking square when I put it down, and I feel very comfortable that I can hit it straight.”

Irons: Titleist T250 4-iron (Mitsubishi MMT Hybrid 100 TX), T100 5-9 irons (KBS C-Taper 125 S+)

Gerard recently upgraded his 4-iron to Titleist’s new T250 after damaging his previous T100. Let’s just say it decided to hug a tree in Napa, California. The less said about that, the better.

“The only reason I did that, is because I knew I had a backup that I liked,” Gerard joked.

With the new T250, Gerard has been able to flight it better than he expected, thanks to the MMT Hybrid 100 TX he’s equipped it with. It’s another club in the bag that he’s added loft to, though, to help overall with his stock launch and apex. It’s actually 24.5 degrees, which is more than the standard 5-iron loft in the set. 

“It’s a lot of loft for a big 4-iron, and that’s just because I’m delofting at impact, but it’s also a big profile, so it’s going to want more ball speed to begin with. So I don’t want tons and tons of ball speed. … The way I launch and deliver it, it hits the numbers I’m looking for.”

Progressing through the irons, Gerard’s 5- and 6-irons are both bent weak, but then from 7- to 9-iron they’re closer to standard. This helps with his gapping, for which he likes “13 to 14-yard increments.”

All the clubs in Gerard’s bag are half an inch longer than standard, so to help with the weighting in the irons, he plays B-weighted (slightly lighter) iron heads. 

Vokey Design SM10 46.10F, SM11 50.08F, 54.10S, 60.08M wedges (KBS C-Taper 125 S+ (46)), (Dynamic Gold S300 (50-60))

Ryan Gerard might not be cleanly shaven, but his wedges are. 

His custom Vokey wedges feature, or should say, do not feature the traditional BV logo. It’s because the team decided to grind away most of the head where the insignia should be.

Unlike his irons, which are made slightly lighter than standard because of his height, Vokey wedge rep Aaron Dill and his team have to shed excess head-weight to help with Gerard’s feel 

“I used to play wedges that had bore holes, so they’d take two small bore holes on either side, but they stopped doing that,” Gerard said. “The material they use now is a bit more amenable to being ground off, so we’re grinding off logos and essentially just looking to lose a little bit of material to get that swing weight down.

“I’m a very feel player and I don’t want to feel something really heavy in my hands when I’m around the green because you’re just living in a world where the ball might come off a little hot or come off a little more unpredictable if you don’t have control of the club face.” 

Putter: Scotty Cameron…something…

Most weeks on Tour, Gerard will carry at least two putters in the bag leading up to the event. In some tournaments, he’s used up to three or four putters during competition.

Models that he regularly sees in the bag are his Scotty Cameron Newport 2, a Tour prototype Phantom 3 or a Phantom 5.2 Circle T (with which he won the Barracuda Championship), a Phantom 9

“I really like it (Phantom 3) because it matches the characteristics of a smaller mallet with the feel of a blade,” Gerard told GolfWRX. “I’ve been a blade guy my entire life, and then started messing around with mallets here recently.

“I don’t think anything matches the feel and speed control of a blade. … I always try to have a Newport 2-style blade in the bag, just to have a back-up option that could go into play at any moment.”

Therefore, this part of the bag will most likely be different depending on when it’s read. 

Ball: Titleist Pro V1

Despite looking for more launch throughout the bag, Gerard plays the Pro V1 for the feel and spin that he can tap into in his short game, especially in the case of short-sided spots found out on Tour. 

“It gives me the feel I’m looking for, especially around the greens, … It allows me to make a confident and committed swing on short shots,” Gerard says. 

Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Neal Shipley, AKA, the “Big Fridge’s,” custom stamping

Published

on

Neal Shipley was the first to admit that he enjoyed his food while in college. But since his days at Ohio State, he’s slimmed down and earned a PGA Tour Card.

That hasn’t stopped him from having fun with his wedge stampings, though it’s led to some misunderstandings.

On the 54 (degree), we have ‘Big Fudge,'” Shipley told GolfWRX. “It was supposed to be ‘Big Fridge,’ so this happened a little while ago. ‘Big Fridge’ was a nickname between my college teammates and I, with ‘fridge’ meaning stomach, a big stomach.

“We told the Ping guys to put … ‘Big Fridge’ on it, and I think maybe some bad cell service or something, and they thought I said ‘fudge,’ so they put fudge on it.”

On Shipley’s 50-degree he also continues the food theme, this time with his go-to order at the “Golden Arches,” and his stamping “DONS 7.”

“The number 7 meal, the two cheeseburger meal, that was my McDonald’s order, back when I would have McDonald’s frequently,” Shipley shared.

Check out Shipley’s full what’s in the bag and the rest of his wedge stampings here on “Inside the Ropes” from Colonial.

Continue Reading

Equipment

From the GolfWRX Classifieds: L.A.B. Purple DF3 with Masters cover

Published

on

At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, @raw10628 has a L.A.B. DF3 putter and Masters putter cover up for grabs.

From the listing: “Some great items here today, time to thin out and make room for next set of gear.  All prices include shipping. 
LAB DF3 Purple 33.5” 68° lie with TPT – $725. LAB Masters release DF3 cover – $150.

To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules

Continue Reading

Whats in the Bag

Maria Torres WITB 2026 (June)

Published

on

Driver: Ping G440 LST (9 degrees)
Shaft: Accra TourZ Green 5-M4

3-wood: Ping G440 Max (15 degrees)
Shaft: Accra TourZ Green 6-M4

5-wood: Ping G440 Max (19 degrees @18)
Shaft: Accra TourZ Green 6-M4

Hybrid: Ping G440 (23 degrees)
Shaft: Oban Isawa Red Hybrid Shaft 04 Flex 70 Gms

Irons: Srixon ZXi7 (5-P)
Shafts: Aerotech SteelFiber Private Reserve i80

Wedges: Cleveland RTZ (50-MID, 54-FULL, 58-MID)
Shafts: Aerotech SteelFiber Private Reserve i105

Putter: L.A.B. Golf OZ.1i
Shaft: ACCRA Putter Shaft

Grips: Golf Pride Tour Velvet

Continue Reading

Announcement

Our Privacy Policy and Terms of Use have been updated as of January 29th, 2026. Please review the updated policies here Privacy Policy | Terms of Use. By continuing to use our site after January 29th, 2026, you agree to the changes.

WITB

Facebook

Trending