Equipment
Want to trick out your putter? Here’s what you need to know
In 2019, one of the coolest parts of the golf world is the plethora of different ways you can accentuate your personality with cool golf swag. One of the most dynamic ways to do this is through a custom finished putter. I have spent the last six months (and about $1,000!) to make sure you get the best outcome for your money.
Intrigued? Good, here’s what you need to know…
Putter refinishing 101
- Stamping is done by hand and therefore never perfectly symmetrical
- Keep in mind there are certain things that cannot be fixed
- Have high expectations: with the right putter, these companies can transform your putter back to 9.99/10.
- Although each and every website has clear pictures, in my opinion the pictures are not perfect, particularly the black oxide/whisky/fuel finishes. It’s a little lighter than I expected and wears significantly more than black
- Sightlines can be a great addition to a putter, but remember, they cannot be removed!
The process
Over 25 years in golf has left me with a healthy collection of Scotty Cameron putters. When I was given an ultimatum to reduce my collection, I decided to take a unique approach: I would have several the old putters refinished. Armed with seven putters in approximately the same condition and the internet, I found seven different companies who offer a refinishing service. Each company cost between $125 and $129. I completed each of their questionnaires and sent them off, anxiously awaiting the results.
The results
One of the most important takeaways from this experiment is that NOT all refinishers are equal. In fact, the results were very binary: three of the companies did outstanding work, while four of the companies return a product which (in my opinion) was completely unacceptable.
Instead of “outing” the terrible work, I have decided to highlight the three companies which produced outstanding work: LabWorx (Waco, TX), Putter Lounge (Denver, Co) and NorCal Putters (Auburn, CA). Each of these companies returned work that was “nearly” new; removed dings, clean paint lines and held very closely to their estimate times.
Here is a Newport done by LabWorx (Waco) in their special “Armor” (more about this below). The finish is clean. All nicks and dents have been removed. It is basically new and looks amazing:
LabWorx “Armor”
An example of LabWorx Armor on a Ping Zing 2
LabWorx in Waco, TX deserves special note based on their R&D development of what they call “Armor”: a specially developed coating which does not impact feel but is extremely durable. The putter that I have, done in this coating has no glare and after almost eight months of play, shows no effects.
Not Just for Scotties
While I had only Scotty Camerons refinished, it is important that you understand that many different putters can be finished. According to Terri at Putter Lounge, “we have a lot of request for a number of different styles of putters, beyond Scotty Camerons, including a lot of Taylor Made Spiders.”
A total transformation that is completely custom for the very reasonable price of $129!
Getting your putter done
If you are looking to get your putter refinished, the first step is to have a clear idea of EXACTLY what you want. Next, I would recommend reaching out to a couple of companies (again, I highly recommend these three based on their work) and ask about wait times. Keep in mind that they can range from a couple of weeks to several months, with wait times increasing in the summer. After selecting the company, you want to go to their website and fill out the questionnaire about your putter; telling them exactly what you want. Send the putter, along with the form, and get ready to impress your friends!
Want to learn more?
LabWorx
NorCal Putters
Putter Lounge
Neal Shipley was the first to admit that he enjoyed his food while in college. But since his days at Ohio State, he’s slimmed down and earned a PGA Tour Card.
That hasn’t stopped him from having fun with his wedge stampings, though it’s led to some misunderstandings.
On the 54 (degree), we have ‘Big Fudge,'” Shipley told GolfWRX. “It was supposed to be ‘Big Fridge,’ so this happened a little while ago. ‘Big Fridge’ was a nickname between my college teammates and I, with ‘fridge’ meaning stomach, a big stomach.
“We told the Ping guys to put … ‘Big Fridge’ on it, and I think maybe some bad cell service or something, and they thought I said ‘fudge,’ so they put fudge on it.”
On Shipley’s 50-degree he also continues the food theme, this time with his go-to order at the “Golden Arches,” and his stamping “DONS 7.”
“The number 7 meal, the two cheeseburger meal, that was my McDonald’s order, back when I would have McDonald’s frequently,” Shipley shared.
At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, @raw10628 has a L.A.B. DF3 putter and Masters putter cover up for grabs.
From the listing: “Some great items here today, time to thin out and make room for next set of gear. All prices include shipping.
LAB DF3 Purple 33.5” 68° lie with TPT – $725. LAB Masters release DF3 cover – $150.”
To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules
Driver: Ping G440 LST (9 degrees)
Shaft: Accra TourZ Green 5-M4
3-wood: Ping G440 Max (15 degrees)
Shaft: Accra TourZ Green 6-M4
5-wood: Ping G440 Max (19 degrees @18)
Shaft: Accra TourZ Green 6-M4
Hybrid: Ping G440 (23 degrees)
Shaft: Oban Isawa Red Hybrid Shaft 04 Flex 70 Gms
Irons: Srixon ZXi7 (5-P)
Shafts: Aerotech SteelFiber Private Reserve i80
Wedges: Cleveland RTZ (50-MID, 54-FULL, 58-MID)
Shafts: Aerotech SteelFiber Private Reserve i105
Putter: L.A.B. Golf OZ.1i
Shaft: ACCRA Putter Shaft
Grips: Golf Pride Tour Velvet
Aaron Rai’s winning WITB: 2026 PGA Championship
Russell Henley’s winning WITB: 2026 Charles Schwab Challenge
Photos from the 2026 CJ Cup Byron Nelson
CJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
Charles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
Details on J.J. Spaun’s surprise putter switch
GolfWRX Launch Report: 2026 Titleist GTS drivers
Photos from the 2026 Charles Schwab Challenge
PGA Championship Tour Report: Fitzpatrick, Koepka among big-name putter switches for Aronimink
Photos from the ShopRite LPGA
Maria Torres WITB 2026 (June)
Driver: Ping G440 LST (9 degrees) Shaft: Accra TourZ Green 5-M4 3-wood: Ping G440 Max (15 degrees) Shaft: Accra TourZ Green 6-M4 5-wood: Ping G440...
Eric Cole WITB 2026 (June)
Driver: PXG Lightning Tour Max (9 degrees) Shaft: Project X Titan Yellow 70 TX 3-wood: TaylorMade Qi4D (15 degrees) Shaft:...
Si Woo Kim WITB 2026 (May)
Driver: Callaway Quantum Triple Diamond (8.5 degrees) Shaft: Fujikura Ventus Black 6 X Mini driver: Callaway Paradym Ai Smoke Mini...
Wyndham Clark’s winning WITB: 2026 CJ Cup Byron Nelson
Driver: TaylorMade Qi4D (10.5 degrees) Shaft: Project X Titan Yellow 60 TX 3-wood: TaylorMade Qi4D Tour (15 degrees) Shaft: Project...
Pingback: Putter Refinishing at Tour Quality Golf: Give Your Clubs a New Lease on Life - N7 Golf Club
Robert
Sep 8, 2019 at 2:56 pm
Why would you not send a “Scotty” back to Scotty Cameron first? Is there a big price difference for the same request?
Fifteenclubs
Sep 8, 2019 at 11:08 pm
Cost for a Custom Shop refinish is about triple what the other companies charge and can take up to three months. I’ve sent putters back to Scotty as well as a couple of these guys and I’ll say if you send them a putter in decent shape it’ll come back looking like new. Same for Scotty but at a much higher price and longer lead time.
Robert
Sep 9, 2019 at 2:33 pm
Thanks for the reply.
Paul
Sep 7, 2019 at 10:01 pm
In my experience, most players that want to “trick out their putter” can barely break 90…
Ed
Sep 7, 2019 at 6:01 pm
Yet GolfWrx doesn’t realize many refinishers use one source – and call it their own. Just saying.
DB
Sep 8, 2019 at 12:57 pm
I have never heard this. You should provide more details.
2putttom
Sep 7, 2019 at 3:54 pm
wonderful
Vic Dirkes
Sep 7, 2019 at 3:06 pm
Putter Lounge bungled my Cameron. The head was not properly epoxied on and they did not follow my directions I carefully filled out. Was supposed to be murdered out and they left the insert the original color. The head was an easy fix but you spend $150 getting it done and it’s wrong. I will never use them again.
I know donkeys
Sep 7, 2019 at 2:06 pm
Matt Kuchar is a big donkey.
Erik Filipiak
Sep 8, 2019 at 9:21 am
You just offended ALL donkeys