Equipment
WRX Spotted: TaylorMade Milled Grind 2 wedges
3M is all about innovation, and this week at the 3M Open, there’s another company showcasing a new innovation. Behold: TaylorMade Milled Grind 2 wedges.
We don’t have an official comment yet from TaylorMade, but based off of the pictures we have so far, we can draw a couple of conclusions about these new wedges (hopefully) coming soon to retail
- There appears to be some type polymer-filled cavity in the back of the wedge. It’s not a big cavity, and we’re not quite sure what its purpose might be, but it could be for a couple reasons: To remove mass, and direct the center of gravity, and/or to improve on the feel (and acoustics)
- Speaking to CG: There seems to be a shifting pad along the back of the wedges with increased thickness in certain areas. Again, this could be to change the feel and move the CG depending on the loft. Doing this can increase spin and trajectory control, which is something everybody wants.
- New face: Heres the give away that this wedge is very close to coming to retail: full-blown finished retail marketing material on the clubs. Anytime a club (any club) shows up with marketing material on the face, means that is has gone through a lot of different people and steps to get there. OEMs don’t put that kind of time into a face sticker without the product being close to hitting shelves.
Speaking to that sticker, TaylorMade is introducing raw-faced wedges. As it has been proven many times, a raw face won’t actually increase spin, but it will reduce glare…and also create a look preferred by many players. Taking a page from the old Nike playbook (remember the coated Engage wedges?), these stickers will keep the faces from rusting on shelves before they go into players’ bags.
The Milled Grind wedges have been a big winner for TaylorMade along with the Hi-Toe wedges, and if this is a sign that raw wedges are coming, then TM is going to have another winner on its hands…and in bags of tour pros and regular golfers alike.
Neal Shipley was the first to admit that he enjoyed his food while in college. But since his days at Ohio State, he’s slimmed down and earned a PGA Tour Card.
That hasn’t stopped him from having fun with his wedge stampings, though it’s led to some misunderstandings.
On the 54 (degree), we have ‘Big Fudge,'” Shipley told GolfWRX. “It was supposed to be ‘Big Fridge,’ so this happened a little while ago. ‘Big Fridge’ was a nickname between my college teammates and I, with ‘fridge’ meaning stomach, a big stomach.
“We told the Ping guys to put … ‘Big Fridge’ on it, and I think maybe some bad cell service or something, and they thought I said ‘fudge,’ so they put fudge on it.”
On Shipley’s 50-degree he also continues the food theme, this time with his go-to order at the “Golden Arches,” and his stamping “DONS 7.”
“The number 7 meal, the two cheeseburger meal, that was my McDonald’s order, back when I would have McDonald’s frequently,” Shipley shared.
At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, @raw10628 has a L.A.B. DF3 putter and Masters putter cover up for grabs.
From the listing: “Some great items here today, time to thin out and make room for next set of gear. All prices include shipping.
LAB DF3 Purple 33.5” 68° lie with TPT – $725. LAB Masters release DF3 cover – $150.”
To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules
Driver: Ping G440 LST (9 degrees)
Shaft: Accra TourZ Green 5-M4
3-wood: Ping G440 Max (15 degrees)
Shaft: Accra TourZ Green 6-M4
5-wood: Ping G440 Max (19 degrees @18)
Shaft: Accra TourZ Green 6-M4
Hybrid: Ping G440 (23 degrees)
Shaft: Oban Isawa Red Hybrid Shaft 04 Flex 70 Gms
Irons: Srixon ZXi7 (5-P)
Shafts: Aerotech SteelFiber Private Reserve i80
Wedges: Cleveland RTZ (50-MID, 54-FULL, 58-MID)
Shafts: Aerotech SteelFiber Private Reserve i105
Putter: L.A.B. Golf OZ.1i
Shaft: ACCRA Putter Shaft
Grips: Golf Pride Tour Velvet
Aaron Rai’s winning WITB: 2026 PGA Championship
Russell Henley’s winning WITB: 2026 Charles Schwab Challenge
Photos from the 2026 CJ Cup Byron Nelson
CJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
Charles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
Details on J.J. Spaun’s surprise putter switch
GolfWRX Launch Report: 2026 Titleist GTS drivers
Photos from the 2026 Charles Schwab Challenge
PGA Championship Tour Report: Fitzpatrick, Koepka among big-name putter switches for Aronimink
Photos from the ShopRite LPGA
Maria Torres WITB 2026 (June)
Driver: Ping G440 LST (9 degrees) Shaft: Accra TourZ Green 5-M4 3-wood: Ping G440 Max (15 degrees) Shaft: Accra TourZ Green 6-M4 5-wood: Ping G440...
Eric Cole WITB 2026 (June)
Driver: PXG Lightning Tour Max (9 degrees) Shaft: Project X Titan Yellow 70 TX 3-wood: TaylorMade Qi4D (15 degrees) Shaft:...
Si Woo Kim WITB 2026 (May)
Driver: Callaway Quantum Triple Diamond (8.5 degrees) Shaft: Fujikura Ventus Black 6 X Mini driver: Callaway Paradym Ai Smoke Mini...
Wyndham Clark’s winning WITB: 2026 CJ Cup Byron Nelson
Driver: TaylorMade Qi4D (10.5 degrees) Shaft: Project X Titan Yellow 60 TX 3-wood: TaylorMade Qi4D Tour (15 degrees) Shaft: Project...
Gary Thompson
Jul 4, 2019 at 9:02 am
RB…You wouldn’t have issue with leaving the sticker on the face would you? Its not like stickers left on clubs are a pet peeve of yours right? Hahaha…
Clay
Jul 3, 2019 at 7:18 pm
The look down looks good. The rest? Too much “stuff”! Time will tell, good luck!
Jim
Jul 3, 2019 at 12:04 pm
The face reminds me of some of really old clubs with the odd face pattern when you look down at it. I really like the current model so hopefully these will be as good. But that face isn’t the best looking.
dat
Jul 3, 2019 at 9:01 am
pass. Make one without a raw face for the mass market, as most people will complain about it after two months when they didn’t clean the face to begin with. Their loss, but the customer will blame TM.
Travis
Jul 26, 2019 at 9:15 pm
The customer won’t complain. Plenty of OEM’s have raw wedges now. It’s becoming more normal and there’s a giant sticker telling you what’s going to happen to the face.
Jarnio Bubly
Jul 3, 2019 at 8:20 am
It looks kind of Hi Toeish already which is nice.
JP
Jul 2, 2019 at 10:53 pm
Just release the hi-toe with the flat leading edge and no gooseneck looking hosel. The one DJ carries. Give me that and I’m a buyer!
Brandon
Jul 2, 2019 at 10:49 pm
That is up there with the ugliest wedges of all time, even though the face is kind of cool looking.