Equipment
For its 50th Anniversary, Ping is recreating the original Anser putters
In 1966, Karsten Solheim invented the Ping Anser putter, which has became so popular that when golfers see an imitator — and there’s a lot of them — they’re often dubbed “Anser-style.” Fifty years later, Ping has gone to great lengths to create a limited-edition line of Anser putters that are as much like the originals as possible.
The limited-edition putters are made from the original Anser molds, using the original parts and metals, and created in the same foundry that produced the first Anser putters. So for golf history buffs, this release is something special.
Making the story better is that Karsten’s son and current Ping CEO John Solheim will have his hands on every single putter released. Ping plans on releasing 1,550 right-handed versions, and 150 left-handed models. Solheim is grinding the soles of each putter, just as he used to do with the original Ansers in his father’s garage.
The putters will have the original Ping grips, which Tiger Woods has since made famous, and the shafts are made by True Temper, with the same step pattern as the originals.
What’s “modernized” about the new putters are the toe and heel bumpers, which used to be shaped by hand using sandpaper. The 2016 versions had that shaping already built into the molds.
Speaking of those molds, there’s either a “K,” which stands for Karsten, or an “A,” which stands for “Allan,” John’s brother, engraved on the hosel of the putters, which indicate which of the two original molds were used to cast each putter. According to John Solheim, the putters produced by the different molds will not be identical because the Karsten, or “K” mold, had the radius on its heel slightly nicked. So the heel on the “K” putters have what John calls the “slope side.”
While the putters are made from the same high-strength, manganese-bronze metal, the hosels are applied with epoxy, while the originals were not. Without the epoxy, the original Anser putters sometimes cracked at the hosel, according to Solheim.
You will also notice inserts in the toe and heel, which are tungsten weights used to bring the heads “up to weight.” The putter heads weigh 350 grams, which is significantly heavier than the originals, but standard these days.
The putters have no release date at this point, but sometime before the 51st Anniversary would be a safe bet. Remember, John Solheim is grinding each of the putters, which he says takes roughly 4-5 minutes each. There is no set price, either, but according to Solheim, “They won’t be cheap.”
Neal Shipley was the first to admit that he enjoyed his food while in college. But since his days at Ohio State, he’s slimmed down and earned a PGA Tour Card.
That hasn’t stopped him from having fun with his wedge stampings, though it’s led to some misunderstandings.
On the 54 (degree), we have ‘Big Fudge,'” Shipley told GolfWRX. “It was supposed to be ‘Big Fridge,’ so this happened a little while ago. ‘Big Fridge’ was a nickname between my college teammates and I, with ‘fridge’ meaning stomach, a big stomach.
“We told the Ping guys to put … ‘Big Fridge’ on it, and I think maybe some bad cell service or something, and they thought I said ‘fudge,’ so they put fudge on it.”
On Shipley’s 50-degree he also continues the food theme, this time with his go-to order at the “Golden Arches,” and his stamping “DONS 7.”
“The number 7 meal, the two cheeseburger meal, that was my McDonald’s order, back when I would have McDonald’s frequently,” Shipley shared.
At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, @raw10628 has a L.A.B. DF3 putter and Masters putter cover up for grabs.
From the listing: “Some great items here today, time to thin out and make room for next set of gear. All prices include shipping.
LAB DF3 Purple 33.5” 68° lie with TPT – $725. LAB Masters release DF3 cover – $150.”
To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules
Driver: Ping G440 LST (9 degrees)
Shaft: Accra TourZ Green 5-M4
3-wood: Ping G440 Max (15 degrees)
Shaft: Accra TourZ Green 6-M4
5-wood: Ping G440 Max (19 degrees @18)
Shaft: Accra TourZ Green 6-M4
Hybrid: Ping G440 (23 degrees)
Shaft: Oban Isawa Red Hybrid Shaft 04 Flex 70 Gms
Irons: Srixon ZXi7 (5-P)
Shafts: Aerotech SteelFiber Private Reserve i80
Wedges: Cleveland RTZ (50-MID, 54-FULL, 58-MID)
Shafts: Aerotech SteelFiber Private Reserve i105
Putter: L.A.B. Golf OZ.1i
Shaft: ACCRA Putter Shaft
Grips: Golf Pride Tour Velvet
Aaron Rai’s winning WITB: 2026 PGA Championship
Russell Henley’s winning WITB: 2026 Charles Schwab Challenge
Photos from the 2026 CJ Cup Byron Nelson
CJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
Charles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
Details on J.J. Spaun’s surprise putter switch
GolfWRX Launch Report: 2026 Titleist GTS drivers
Photos from the 2026 Charles Schwab Challenge
PGA Championship Tour Report: Fitzpatrick, Koepka among big-name putter switches for Aronimink
Photos from the ShopRite LPGA
Maria Torres WITB 2026 (June)
Driver: Ping G440 LST (9 degrees) Shaft: Accra TourZ Green 5-M4 3-wood: Ping G440 Max (15 degrees) Shaft: Accra TourZ Green 6-M4 5-wood: Ping G440...
Eric Cole WITB 2026 (June)
Driver: PXG Lightning Tour Max (9 degrees) Shaft: Project X Titan Yellow 70 TX 3-wood: TaylorMade Qi4D (15 degrees) Shaft:...
Si Woo Kim WITB 2026 (May)
Driver: Callaway Quantum Triple Diamond (8.5 degrees) Shaft: Fujikura Ventus Black 6 X Mini driver: Callaway Paradym Ai Smoke Mini...
Wyndham Clark’s winning WITB: 2026 CJ Cup Byron Nelson
Driver: TaylorMade Qi4D (10.5 degrees) Shaft: Project X Titan Yellow 60 TX 3-wood: TaylorMade Qi4D Tour (15 degrees) Shaft: Project...
cgasucks
Jun 20, 2016 at 2:38 pm
If Mr. Solheim himself is going to grind the putters like his dad did you know its not gonna be cheap…
MisawaGol4
Jun 16, 2016 at 6:23 am
So these are exactly like the originals, same metal, same molds, and from the same garage. Minus the fact that now they have added weight plugs and the hosels are attached differently, but John Solheim will be guaranteed to have touched these for at least 4 whole minutes! Who can put a price tag on that? Apparently Ping can. There is a reason the originals value will increase and these will start high but never really amount to much. I never buy a limited or collectors edition of anything. You are guaranteed that they will be anything but that.
jimmy snodgrass
Jun 15, 2016 at 11:04 am
maybe i should’nt give my secrets away but i could never afford pro shop prices for clubs or clothing, i play golf at public courses because of the mostly private club restrictions on attire. i wear golf polo shirts, with whatever nice club logo i know, have a dozen masters shirts, several congressionals, and even a bob hope chrysler classic, most of them bought for 2 to 3 dollars. i wear levi’s , not holed up because they fit me best. i had a fairly nice, pleated pair of pants with the pockets cut down the sides, hopped into a golf cart, and lost most of the items in my pockets, because, when sitting, the pockets were parallel, coins and a swiss army knife were lost somewhere on the course, and i still have 2 pairs of leather footjoy classics with steel spikes, in great shape, just waiting for the day when they are re-allowed.
Ryan morris
Jun 16, 2016 at 4:46 am
I missed the secret.
The MailMan
Jun 19, 2016 at 3:30 am
Not true. I am actually doing your husband.
Anser 4
Jun 15, 2016 at 12:58 am
If this came in Anser 4 I would be over it like a rash.
Weekend Duffer
Jun 14, 2016 at 11:13 pm
You can buy the actual originals for $35 on eBay, yet they will likely charge $350 for the remake.
Joey
Jun 15, 2016 at 8:58 am
Less than that. You can get Zings and My Days for around $10 bucks (shipping not included).
Joe Duffer
Jun 15, 2016 at 12:08 pm
Wrong… a nice original Scottsdale Anser will still bring north of $1000