Equipment
Odyssey’s Milled Collection putters comes to the U.S.
Odyssey’s new Milled Collection Putters were originally a Japan-only release, but like many successful equipment releases overseas, they’ve made the voyage to America.
The putters, which were released to PGA Tour players at the Arnold Palmer Invitational and have been available in Japan since September, are slightly different than Odyssey’s Works putters.
The biggest difference? The Milled Collection putters, as the name implies, are CNC milled. They also have adjustable weights in their soles.
Related: A White Hot Mesh: Odyssey Works putters
Face On: An Odyssey Milled Collection #9 putter
Like the Works line, the Milled Collection putters use the company’s Fusion RX inserts — a White Hot insert covered with a Metal-X stainless steel mesh cover. But compared to the Works putters, the Milled Collection models are made with flatter top lines and more squared off head shapes.
Odyssey’s Works (top) and Milled Collection #9 putters. Notice the flatter top line in the respective #9 models.
Although six models are available internationally, Odyssey’s Milled Collection will be released in the U.S. on April 17 in four models — #2, #5, #6M and #9. They will sell for $349 each.
The putters come with three sets of adjustable weights, which make 340-, 350- and 360-gram head weights possible so that golfers can fine tune feel.
Neal Shipley was the first to admit that he enjoyed his food while in college. But since his days at Ohio State, he’s slimmed down and earned a PGA Tour Card.
That hasn’t stopped him from having fun with his wedge stampings, though it’s led to some misunderstandings.
On the 54 (degree), we have ‘Big Fudge,'” Shipley told GolfWRX. “It was supposed to be ‘Big Fridge,’ so this happened a little while ago. ‘Big Fridge’ was a nickname between my college teammates and I, with ‘fridge’ meaning stomach, a big stomach.
“We told the Ping guys to put … ‘Big Fridge’ on it, and I think maybe some bad cell service or something, and they thought I said ‘fudge,’ so they put fudge on it.”
On Shipley’s 50-degree he also continues the food theme, this time with his go-to order at the “Golden Arches,” and his stamping “DONS 7.”
“The number 7 meal, the two cheeseburger meal, that was my McDonald’s order, back when I would have McDonald’s frequently,” Shipley shared.
At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, @raw10628 has a L.A.B. DF3 putter and Masters putter cover up for grabs.
From the listing: “Some great items here today, time to thin out and make room for next set of gear. All prices include shipping.
LAB DF3 Purple 33.5” 68° lie with TPT – $725. LAB Masters release DF3 cover – $150.”
To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules
Driver: Ping G440 LST (9 degrees)
Shaft: Accra TourZ Green 5-M4
3-wood: Ping G440 Max (15 degrees)
Shaft: Accra TourZ Green 6-M4
5-wood: Ping G440 Max (19 degrees @18)
Shaft: Accra TourZ Green 6-M4
Hybrid: Ping G440 (23 degrees)
Shaft: Oban Isawa Red Hybrid Shaft 04 Flex 70 Gms
Irons: Srixon ZXi7 (5-P)
Shafts: Aerotech SteelFiber Private Reserve i80
Wedges: Cleveland RTZ (50-MID, 54-FULL, 58-MID)
Shafts: Aerotech SteelFiber Private Reserve i105
Putter: L.A.B. Golf OZ.1i
Shaft: ACCRA Putter Shaft
Grips: Golf Pride Tour Velvet
Aaron Rai’s winning WITB: 2026 PGA Championship
Russell Henley’s winning WITB: 2026 Charles Schwab Challenge
Photos from the 2026 CJ Cup Byron Nelson
CJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
Charles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
Details on J.J. Spaun’s surprise putter switch
GolfWRX Launch Report: 2026 Titleist GTS drivers
Photos from the 2026 Charles Schwab Challenge
PGA Championship Tour Report: Fitzpatrick, Koepka among big-name putter switches for Aronimink
Photos from the ShopRite LPGA
Maria Torres WITB 2026 (June)
Driver: Ping G440 LST (9 degrees) Shaft: Accra TourZ Green 5-M4 3-wood: Ping G440 Max (15 degrees) Shaft: Accra TourZ Green 6-M4 5-wood: Ping G440...
Eric Cole WITB 2026 (June)
Driver: PXG Lightning Tour Max (9 degrees) Shaft: Project X Titan Yellow 70 TX 3-wood: TaylorMade Qi4D (15 degrees) Shaft:...
Si Woo Kim WITB 2026 (May)
Driver: Callaway Quantum Triple Diamond (8.5 degrees) Shaft: Fujikura Ventus Black 6 X Mini driver: Callaway Paradym Ai Smoke Mini...
Wyndham Clark’s winning WITB: 2026 CJ Cup Byron Nelson
Driver: TaylorMade Qi4D (10.5 degrees) Shaft: Project X Titan Yellow 60 TX 3-wood: TaylorMade Qi4D Tour (15 degrees) Shaft: Project...
gunmetal
Mar 23, 2015 at 1:14 pm
I’m not sure if these differentiate from the standard Works collection enough to justify the $200 difference. “flatter toplines and more squared off head shapes”???? Oh and a weight kit??? Oh yeah and the part that you don’t use at impact is milled so that’s good. But I’m sure they’ll sell a crap ton.
HL
Mar 20, 2015 at 6:05 pm
If you cant put, you cant score. But if you cant drive you cant play.
I will buy a R15 TP instead, 🙂
Brian
Mar 19, 2015 at 12:31 pm
Why would I get this if its the same price as a Scotty? Serious question because I’m in the market for a real putter.
Dick
Mar 18, 2015 at 5:40 pm
inserts…yuck!
T-MAC
Mar 18, 2015 at 1:20 pm
Agree with Scooter. You are making contact with the face and if it has an insert, then it doesn’t really matter if it is a milled putter. Same thing with the Cameron’s that have inserts, like the TeI3 line or the new Golo series with the alum wrap around face that is supposed to give it a soft, insert-like feel. Why put that on a milled putter?
And where are the people who complain about Cameron’s putters costing 350.00 when Odyssey is at the same price point on their milled putters (and so are others)? Thing is, buy a 350.00 Cameron and a 350.00 Odyssey and sell them both a year later and see which one was the better investment. Won’t even be close.
Brad
Mar 18, 2015 at 1:33 pm
Well said Sir….
Benji
Mar 18, 2015 at 8:16 am
It looks like the significant advantage these have over the works is the the adjustable weights. The milling doesn’t seem to bring much to the table.
slider
Mar 17, 2015 at 1:58 pm
very similar to scotty odyssey is moving away from making putters for the masses and going to more high end stuff
Joe
Mar 18, 2015 at 1:06 pm
Odyssey does offer $350+ putters like every manufacturer should, but also offer high quality putters for less than half that.
Scooter McGavin
Mar 17, 2015 at 1:54 pm
I always wondered what the benefit there was to a putter being milled if it has an insert. I mean, you’re not hitting on milled grooves, and the insert is going to have the biggest effect on feel, right? So doesn’t that cancel out the feel aspect? Anyone care to enlighten me?
JE
Mar 17, 2015 at 2:58 pm
Marketing my friend. All about finding a niche and filling it with product. They make products according to where they think the demand will be. Apparently they see an opportunity to compete with SC, etc. Sell fewer putters but at a higher gross margin.