Equipment
Scotty Cameron goes high tech with new GoLo putters
Scotty Cameron’s new GoLo 3, GoLo 5, GoLo 5R and Golo 6 putters merge aluminum and stainless steel in a innovative way that the putter maker says could influence his future designs.
Designing putters is a process, Cameron said, but the driving force of the new line was his curiosity about putter inserts.
An unshafted GoLo 5 putter. Notice the raised alignment aid, which is the aluminum Face-Core Sole poking through the stainless steel body.
[quote_box_center]“I’d always wondered, with a conventional insert, if you hit it thin – which is very common considering putting surfaces are rarely level – do you hit the portion of the putter face below the insert?” he said. “And how does that affect the feel and performance? Inserts are used for feel, not for performance. But performance is, in part, due to feel. So, I thought, why not just take the seam out?”[/quote_box_center]
Cameron’s GoLo 5R, which has a more rounded appearance at address than the GoLo 5.
Cameron explored eliminating the seam that inserts create below the center of the face, which he accomplished with what the company is calling a Face-Sole Core.
The Face-Sole Core is made from aircraft-grade, anodized aluminum, and constitutes the entirety of the face and midsection of the putter. It’s wrapped in a heavier, 303-stainless steel frame that gives the putter its shape and has performance benefits as well.
Two pieces — a stainless steel body (left) and an aluminum Face-Sole Core — make up each of the new Cameron GoLo putters
[quote_box_center]“The goal of the design was to move the weight out of the midsection and enhance the perimeter weighting like a horseshoe around the outside to create higher moment of inertia and increase the resistance to twist,” Cameron said. “So the more we can get a horseshoe, getting the weight out and back, the better off we are on off-center hits.”[/quote_box_center]
The aluminum Face-Sole Core and stainless steel frame are joined with a vibration dampening system — rubber bars that sit between the two pieces and keep them from touching — to give the putters a softer feel than previous GoLo putters.
A closeup of the Face-Sole Core, which attaches to the stainless steel body with a vibration dampening system to create a softer feel.
The last, and maybe one of the most important feature of the putters is their new four-way sole design, which is shaped in such a way that the putter will not sit opened or closed when it is soled at address.
“IT SITS DEAD CENTER,” CAMERON SAID.
To prove his point, Cameron spun one of the new GoLo putter heads on a glass table to show how it would rotate 360-degrees in perfect balance.
[quote_box_center]“Hardly ever are you on a flat surface on a putting green, so we made the draft angles perfect in each direction, front-to-back, heel-to-toe, so that you’re not going to snag the ground,” he said. [/quote_box_center]
The GoLo putters ($379) have Cameron’s Silver Mist finish and use the company’s 10-inch, 77-gram Matador Red Midsize grips. They’ll be in stores April 3.
See photos of each of the five new models in the slideshows below. Click here to see what GolfWRX Members are saying about the new putters in our forum.
Scotty Cameron GoLo 3
Lengths: 33, 34 and 35 inches
Neck: Flare
Toe Flow: Maximum
Offset: Three-quarters
Stock Head weight: 350 grams
Scotty Cameron GoLo 5
Lengths: 33, 34 and 35 inches
Neck: Single Bend
Toe Flow: Near Face Balanced
Offset: Full Shaft
Stock Head weight: 350 grams
Scotty Cameron GoLo 5R
Lengths: 33, 34 and 35 inches
Neck: Single Bend
Toe Flow: Near Face Balanced
Offset: Full Shaft
Stock Head weight: 350 grams
Scotty Cameron Golo 5R Dual Balance
Lengths: 33, 34 and 35 inches
Neck: Single Bend
Toe Flow: Near Face Balanced
Offset: Full Shaft
Stock Head weight: 400 grams
The Golo 5R Dual Balance has a stock length of 38 inches and a 50-gram counterweight under the butt end of the grip.
Scotty Cameron Golo 6
Lengths: 33, 34 and 35 inches
Neck: Single Bend
Toe Flow: Near Face Balanced
Offset: Full Shaft
Stock Head weight: 350 grams
Click here to see what GolfWRX Members are saying about the new putters in our forum.
Neal Shipley was the first to admit that he enjoyed his food while in college. But since his days at Ohio State, he’s slimmed down and earned a PGA Tour Card.
That hasn’t stopped him from having fun with his wedge stampings, though it’s led to some misunderstandings.
On the 54 (degree), we have ‘Big Fudge,'” Shipley told GolfWRX. “It was supposed to be ‘Big Fridge,’ so this happened a little while ago. ‘Big Fridge’ was a nickname between my college teammates and I, with ‘fridge’ meaning stomach, a big stomach.
“We told the Ping guys to put … ‘Big Fridge’ on it, and I think maybe some bad cell service or something, and they thought I said ‘fudge,’ so they put fudge on it.”
On Shipley’s 50-degree he also continues the food theme, this time with his go-to order at the “Golden Arches,” and his stamping “DONS 7.”
“The number 7 meal, the two cheeseburger meal, that was my McDonald’s order, back when I would have McDonald’s frequently,” Shipley shared.
At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, @raw10628 has a L.A.B. DF3 putter and Masters putter cover up for grabs.
From the listing: “Some great items here today, time to thin out and make room for next set of gear. All prices include shipping.
LAB DF3 Purple 33.5” 68° lie with TPT – $725. LAB Masters release DF3 cover – $150.”
To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules
Driver: Ping G440 LST (9 degrees)
Shaft: Accra TourZ Green 5-M4
3-wood: Ping G440 Max (15 degrees)
Shaft: Accra TourZ Green 6-M4
5-wood: Ping G440 Max (19 degrees @18)
Shaft: Accra TourZ Green 6-M4
Hybrid: Ping G440 (23 degrees)
Shaft: Oban Isawa Red Hybrid Shaft 04 Flex 70 Gms
Irons: Srixon ZXi7 (5-P)
Shafts: Aerotech SteelFiber Private Reserve i80
Wedges: Cleveland RTZ (50-MID, 54-FULL, 58-MID)
Shafts: Aerotech SteelFiber Private Reserve i105
Putter: L.A.B. Golf OZ.1i
Shaft: ACCRA Putter Shaft
Grips: Golf Pride Tour Velvet
Aaron Rai’s winning WITB: 2026 PGA Championship
Russell Henley’s winning WITB: 2026 Charles Schwab Challenge
Photos from the 2026 CJ Cup Byron Nelson
CJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
Charles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
Details on J.J. Spaun’s surprise putter switch
GolfWRX Launch Report: 2026 Titleist GTS drivers
Photos from the 2026 Charles Schwab Challenge
PGA Championship Tour Report: Fitzpatrick, Koepka among big-name putter switches for Aronimink
Photos from the ShopRite LPGA
Maria Torres WITB 2026 (June)
Driver: Ping G440 LST (9 degrees) Shaft: Accra TourZ Green 5-M4 3-wood: Ping G440 Max (15 degrees) Shaft: Accra TourZ Green 6-M4 5-wood: Ping G440...
Eric Cole WITB 2026 (June)
Driver: PXG Lightning Tour Max (9 degrees) Shaft: Project X Titan Yellow 70 TX 3-wood: TaylorMade Qi4D (15 degrees) Shaft:...
Si Woo Kim WITB 2026 (May)
Driver: Callaway Quantum Triple Diamond (8.5 degrees) Shaft: Fujikura Ventus Black 6 X Mini driver: Callaway Paradym Ai Smoke Mini...
Wyndham Clark’s winning WITB: 2026 CJ Cup Byron Nelson
Driver: TaylorMade Qi4D (10.5 degrees) Shaft: Project X Titan Yellow 60 TX 3-wood: TaylorMade Qi4D Tour (15 degrees) Shaft: Project...
Bob
Apr 27, 2015 at 10:32 am
Go back to making Anser clones.
Joe Duffer
Mar 21, 2015 at 2:14 am
Huge pile of steaming…
Mike
Feb 5, 2015 at 10:34 pm
obviously the majority of the people on this site have never experienced a Cameron experience. Scotty would not throw a piece of junk out. He has to continue to make putters to please the people and why not try and improve the putter game.
Ballstrikaaa
Jan 26, 2015 at 11:20 pm
Uhhh……I’m still waiting for the fins and top side whale tail attachment. I hate to jump on the
bandwagon of dissenters here, but goodness gracious “as Jack would say,” these offerings
are hideous. I remember when Scotty’s over priced tools sold for $299 a pop, but the designs
were smooth and clean without over designed head covers. At $379, he has officially lost me.
Michael M
Jan 25, 2015 at 8:40 pm
#6 should be called the apple bottom putter. waht an ugly fricking putter.
Matt Heister
Jan 24, 2015 at 8:53 am
Hope he makes a CS. Holy cow!
Raven
Jan 22, 2015 at 1:08 pm
If you are hitting a putt that thin then the seam is probably the last of your problems. The best feeling Camerons to me are the ones which use a 303SS face, take that away and they are just another cookie in the pot.
Mike M
Jan 22, 2015 at 12:43 pm
He is creative, besides, who looks at the sole plate when putting. You know he has the data to back up his claims or he wouldn’t be doing them. I just wonder why there doesnt seem to be a center shafted model like the GoLo 5S offered today. To me it has the best look from the grip to the ball. The price ? You didn’t think it ws going to be cheaper did you?
The gentlement to resonded about getting a used Del Mar, that is a good thought, I would be suprised the price of a used GSS 009 isn’t doubled after Jimmie Walkers win this past weekend.
Steve
Jan 22, 2015 at 4:52 pm
Definitely, everyone is going to want Jimmy, I repeat Jimmy Walkers putter because he won the Sony. What is the big news with this putter, huh right, the insert goes to the bottom. Charge $379 for that sounds like a bargain. Get a metal x putter for $50, but you don’t get the Scotty headcover showing in your bag. Mmmm, have to rethink this. there are a lot of great Cameron putters these are not one of them
Joey
Jan 22, 2015 at 12:08 pm
Looks like a ‘B’ on that Golo 6 putter. Pretty grotesque.
Mike
Jan 22, 2015 at 11:13 am
I guess this is the beginning of the end for the Scotty Cameron run on putters. These look absolutely horrible!
Steve
Jan 22, 2015 at 10:28 am
$379 for a putter with a insert putter? Cameron is losing their mojo. But 99% of Cameron’s are sold because of status not performance. Not saying they don’t make or have made great putters. But….. You know the rest
Duncan Castles
Jan 22, 2015 at 10:17 am
$379???
TR1PTIK
Jan 22, 2015 at 7:22 am
Not a fan. Even though I have an Odyssey White Hot Pro and know what it feels like to hit it thin, I just don’t like the look of these enough to ever spend the ridiculous amount of money he wants for them. I’d rather spend that kind of money on an Odyssey Mextal-X Milled or Works putter. Or, I could just track down a lightly used California Del Mar for considerably less than any of those.
Eagle006
Jan 21, 2015 at 8:29 pm
These look like they were designed by a 9 year old Transformers fan. He sure does churn out some junk these days. What happened to the classic designs like the Teryllium or Studio stainless series?
Preston
Jan 21, 2015 at 6:55 pm
Why an aluminum insert? Can i wrap a beer can around my putter and get an idea of the feel of the insert?
Bryan
Jan 23, 2015 at 11:25 am
I hope you’re not serious. They used to make beer cans out of steel, in fact some beer companies still use steel cans. Can I just take one of those, put a shaft in it and get an idea of the feel of a steel head putter?
mark d
Jan 21, 2015 at 6:05 pm
Common sense prevails. Now do one on a Newport or Newport Two design, nothing funky-looking from address (like the old Terylliums), keep the graphics (relatively) calm and you’ve got the whole smash. My 2¢.
slider
Jan 21, 2015 at 5:47 pm
these look nice another gem from scotty
Rich
Jan 21, 2015 at 9:30 pm
Really? Are you looking at the same putter I just did? To each their own I guess.
Mike
Jan 21, 2015 at 5:42 pm
Any Left Handed Options??
Kim
Jan 21, 2015 at 5:12 pm
Golfsmith was doing an insert that went to the bottom of the face about 10-15 years ago and I wondered why nobody else did it. The hitting it thin miss kept me from using insert putters so will be interesting to try this one.
Bryan
Jan 21, 2015 at 5:09 pm
Wow, can anyone say rip off of Ping’s B60??? Maybe that’s why he’s calling that one GoLo 6…
RG
Jan 23, 2015 at 11:06 pm
This ain’t the first time he’s ripped off Ping.
Nice
Jan 21, 2015 at 5:05 pm
Is Scotty drinking the Taylormade koolaid? What’s up with releasing putters on top of putters?
LOL
Jan 21, 2015 at 4:53 pm
LOL.
Why not forget the insert altogether and just make it all solid like it used to be?
Josh
Jan 22, 2015 at 11:03 am
Increased MOI. But I don’t think I can stand the looks of these to justify a slight MOI increase…
Juan Carlos
Jan 21, 2015 at 4:49 pm
Scotty must been spending too much time at the local Hooters, cause the GOLO 6 looks like a pair O Jugs if you know what I mean…. ( . Y . )
Jay
Jan 22, 2015 at 7:15 pm
Put a couple of turbulators on the back of them and……
RG
Jan 23, 2015 at 11:07 pm
And some sliding weights…