Equipment
Matrix TPHDe shafts
Matrix’s new TPHDe shafts use the latest materials in a new construction that can improve ball speed, feel and stability, according to the company.
Like its predecessor, Matrix’s TPHD shaft, the TPHEe uses exotic materials such as Zylon, Boron and Gmat to stabilize the shaft without increasing weight or making the shaft feel stiffer.
[youtube id=”_JASvOxzjU0″ width=”620″ height=”360″]
In Matrix’s TPHD, the HD section, or 16-sided hexadecagonal internal platform, was located in the upper portion of the shaft. In the TPHDe, Matrix extended the HD section down the body of the shaft. According to Chris Nolan, Matrix’s executive vice president for global operations, that allowed the company to make improvements to the shaft’s design that were not possible with the TPHD.
“In car terms, we’re trying to make sure the chassis is as stiff as possible,” Nolan said. “By extending the HD section, we’re able to increase stability without losing feel.”
The exotic materials and the construction of those materials, however, come at a cost. With a $1200 MSRP, the TPHDe is one of the priciest shafts on the market.
“We’re dealing with different raw materials that have different properties, and it’s a very technical process to get those materials to stay together,” Nolan said.
The TPHDe shafts offer a mid-launch, mid-spin trajectory and are available in weights of 50 grams, 60 grams and 70 grams in eight different flexes ranging from lady to XX-stiff.
They have a balance point that is about 0.5 inches higher (toward the butt section) than the TPHD, which allows golfers to retain traditional swing weights with today’s heavier club heads or build the driver to a longer finished length to increased club head speed.
Matrix’s TPHDe shafts will ship to retailers later this month.
Neal Shipley was the first to admit that he enjoyed his food while in college. But since his days at Ohio State, he’s slimmed down and earned a PGA Tour Card.
That hasn’t stopped him from having fun with his wedge stampings, though it’s led to some misunderstandings.
On the 54 (degree), we have ‘Big Fudge,'” Shipley told GolfWRX. “It was supposed to be ‘Big Fridge,’ so this happened a little while ago. ‘Big Fridge’ was a nickname between my college teammates and I, with ‘fridge’ meaning stomach, a big stomach.
“We told the Ping guys to put … ‘Big Fridge’ on it, and I think maybe some bad cell service or something, and they thought I said ‘fudge,’ so they put fudge on it.”
On Shipley’s 50-degree he also continues the food theme, this time with his go-to order at the “Golden Arches,” and his stamping “DONS 7.”
“The number 7 meal, the two cheeseburger meal, that was my McDonald’s order, back when I would have McDonald’s frequently,” Shipley shared.
At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, @raw10628 has a L.A.B. DF3 putter and Masters putter cover up for grabs.
From the listing: “Some great items here today, time to thin out and make room for next set of gear. All prices include shipping.
LAB DF3 Purple 33.5” 68° lie with TPT – $725. LAB Masters release DF3 cover – $150.”
To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules
Driver: Ping G440 LST (9 degrees)
Shaft: Accra TourZ Green 5-M4
3-wood: Ping G440 Max (15 degrees)
Shaft: Accra TourZ Green 6-M4
5-wood: Ping G440 Max (19 degrees @18)
Shaft: Accra TourZ Green 6-M4
Hybrid: Ping G440 (23 degrees)
Shaft: Oban Isawa Red Hybrid Shaft 04 Flex 70 Gms
Irons: Srixon ZXi7 (5-P)
Shafts: Aerotech SteelFiber Private Reserve i80
Wedges: Cleveland RTZ (50-MID, 54-FULL, 58-MID)
Shafts: Aerotech SteelFiber Private Reserve i105
Putter: L.A.B. Golf OZ.1i
Shaft: ACCRA Putter Shaft
Grips: Golf Pride Tour Velvet
Aaron Rai’s winning WITB: 2026 PGA Championship
Russell Henley’s winning WITB: 2026 Charles Schwab Challenge
Photos from the 2026 CJ Cup Byron Nelson
CJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
Charles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
Details on J.J. Spaun’s surprise putter switch
GolfWRX Launch Report: 2026 Titleist GTS drivers
Photos from the 2026 Charles Schwab Challenge
PGA Championship Tour Report: Fitzpatrick, Koepka among big-name putter switches for Aronimink
Photos from the ShopRite LPGA
Maria Torres WITB 2026 (June)
Driver: Ping G440 LST (9 degrees) Shaft: Accra TourZ Green 5-M4 3-wood: Ping G440 Max (15 degrees) Shaft: Accra TourZ Green 6-M4 5-wood: Ping G440...
Eric Cole WITB 2026 (June)
Driver: PXG Lightning Tour Max (9 degrees) Shaft: Project X Titan Yellow 70 TX 3-wood: TaylorMade Qi4D (15 degrees) Shaft:...
Si Woo Kim WITB 2026 (May)
Driver: Callaway Quantum Triple Diamond (8.5 degrees) Shaft: Fujikura Ventus Black 6 X Mini driver: Callaway Paradym Ai Smoke Mini...
Wyndham Clark’s winning WITB: 2026 CJ Cup Byron Nelson
Driver: TaylorMade Qi4D (10.5 degrees) Shaft: Project X Titan Yellow 60 TX 3-wood: TaylorMade Qi4D Tour (15 degrees) Shaft: Project...
xboxkilla
Jul 22, 2014 at 2:50 am
If you really want a $1200 shaft, but for way less than these guys are charging- go with a Penley shaft. They sell them on their site and the designer can be contacted almost anytime to answer questions-
check out the ET2 on there-
http://www.penleysports.com/products/penley-et2-shaft/
TheLegend
Apr 20, 2014 at 5:28 pm
lol nice trying to save this guy zak. He should never talk again. But you did a good job trying to find out what these shaft actually do better. But he had no real answer.
Zak Kozuchowski
Apr 20, 2014 at 7:43 pm
Guys,
I think you’re being a little hard on Chris. It was an impromptu interview about a very complex shaft. He’s an extremely kind, knowledgeable guy, and the fitters I speak to on a regular basis praise Matrix’s products as some of the best at creating a little extra ball speed.
Shaft companies spend a lot of time trying to explain their products to the masses, but the only real way to know how each will affect your performance is to find a custom fitter who stocks a lot of shafts and hit them for yourself. Most good club fitters will work within their customer’s budget, giving them several options at different price points. The TPHDe is certainly not for everyone, both in its cost and profile, but fitters such as Modern Golf in Toronto sell quite of few of them. To each is own.
brad
Apr 17, 2014 at 7:19 am
In his defense, it is quite difficult to push the tech boundary…these things are pricey in the beginning, but as it takes hold and materials and processes become more common, we’ll see similar shafts at “reasonable” prices. Remember, none of our wives or girlfriends understands why the thousand dollar irons we play are any better than the irons she saw at Target. If it were anyone but Matrix, I would call BS, but they’ve never let me down. Now we wait…
west
Apr 17, 2014 at 2:40 pm
Umm it’s not the price that I’m surprised by. Yes, the materials and processes used to make this shaft actually justify its cost. This shaft is like the Lamborghini of golf shafts, and while not everyone can afford an exotic or needs the performance of an exotic, it’s the people with excess cash who can justify the self indigence, no questions asked. What shocks the hell out of me is this “executive’s” piss-poor ability to market his company’s product. If I didn’t already know all the tech about golf shafts, and was just an average Joe golfer in the market, after seeing this interview I would not have any confidence in the TPHDe line or Matrix as a company. Just surprises me how unprepared this guy was to pitch his product…
west
Apr 17, 2014 at 4:04 am
This guy is the VP of operations? Seriously??
R
Apr 17, 2014 at 12:19 am
Gotta say I wasn’t impressed with this guys interview. Zak had to come in at the end and kind of bring some positivity back to it.
Nick
Apr 16, 2014 at 7:16 pm
For $1200 Im taking another golf vacation instead.
Petercybulski
Apr 16, 2014 at 7:42 pm
Well said
Petercybulski
Apr 16, 2014 at 5:17 pm
Gonna put those bad boys in my woods and irons!!!
Xreb
Apr 16, 2014 at 4:39 pm
You can see the guy struggling to explain the price point of the shaft, although I give him credit for keeping the BS to a minimum !